Search results

  1. I

    Post at anglez on decking abgle

    Hi how does one get angle right with 4 sided posts...so puc attached is post on right angled for deck angle and front are normal facing...post top right is facing front like others on front so not sure what l do there, is there 6 sided posts lol, know whag ya thinking just go straight...
  2. I

    Decking joists or nugget cut fit

    sounds good man thanks for help :)
  3. I

    2x6 joist hangers image check

    thanks man will use 30mm nails on these https://www.amazon.co.uk/gp/product/B09ZMDYTRZ/ref=ask_ql_qh_dp_hza
  4. I

    2x6 joist hangers image check

    I will go with hangers on both end and do the joists at 400mm apart, add supports underneath...nail the 2x6 joists hangers with 30mm screws, hope agree and thanks.
  5. I

    2x6 joist hangers image check

    no its not much lower about a foot and no neighbours here, we are remote
  6. I

    2x6 joist hangers image check

    Hi chaps does the attached look right so 2x6 cross beams attached to sides with hangers either side, would add support underneath after, also on left I think the end board should go to the outside of the posts not inside as I have on the image?
  7. I

    Decking joists or nugget cut fit

    Please see attached, red is hangers for both end of the 2x6 joists. I would then add some support underneath the joists to. I think the left cross needs to go outside the posts not screwed to the inside? Thanks
  8. I

    Decking joists or nugget cut fit

    think I will just do hangers both sides, so you mean screw thru on cross piece but then still add hanger for extra support on the inside?
  9. I

    Decking joists or nugget cut fit

    Hi chaps not sure whether to use 47x150 joist hangers on both sides of the frame for the 2x6 timber crosses, I could cut out the timber to sit on top of the 2x6 facings, although would need to drop them a bit to level the top, so not sure do I do that and save cash or do I put hangers on each...
  10. I

    Painting OSB

    Hey thanks for this was looking, what color is that? have you link to that paint I was going to use Bedec barn paint?
  11. I

    OSB internal walls paint

    Hi all, I have internal osb walls, advised Bedec barn paint or Bedev multi surface, which would be best? thx
  12. I

    Weed barrier vs breathable mebrane

    Will give it a go...:)
  13. I

    Weed barrier vs breathable mebrane

    Thanks Deluks, think put loads of slits in, I wont use it elsewhere so give it a go with plenty of slits, thanks man.
  14. I

    Weed barrier vs breathable mebrane

    Hi I need to lay some gravel and have about 40m left over of roof breathable membrane, can I use that for ground weed control instead of the normal weedb control sheets. Thanks
  15. I

    Decking Balcony Side walls cladding

    Hi chaps, I have a decent sized decking balcony, want to put walls up to stop wind and make it more cozy, not sure what wood that is to clad? or would normal deck boards be better? Aim is to fit to sides sand and wax. Any advise greatly appreciated. Thinking this stuff...
  16. I

    Scaffold boards for Window shelves and others

    Someone mentioned Douglas Fir but I dont think it will be as rustic as the scaffolds.
  17. I

    Scaffold boards for Window shelves and others

    Looks great that, think scaffold is way to go...
  18. I

    Scaffold boards for Window shelves and others

    Hello I normally use scaffold boards for window shelves and kitchen shelves as they come up great after sanding and waxing to look rustic, they are 225mm wide which is great but is there other wood types that will give same look that are similar in width and thickness...38mm - 40mm. I believe...
  19. I

    Hinge type

    Thanks chaps will look at suggestions.
  20. I

    Hinge type

    Hi yes like below, so it goes in this one but keeps popping out.
Back
Top