Search results

This camera is great value; http://www.hikvision.com/en/Products_accessries_179_i6293.html

Think that mean that the control panel is no longer seeing device 0 the keypad. Try setting and unsetting the alarm and see if it clears.

I think 45 seconds is the maximum entry time allowed. However this would be a badly designed system imo.

Looks like rain has dried on the cover causing the ir to reflect. Glass cleaner with microfibre cloth. Might also be worth gently wiping the lens itself.

Best if you can post a screenshot. If the weather forecast is fine maybe try the camera at night without the plastic dome cover.

Either the dome glass/plastic requires cleaning or it has previously been cleaned and scratched. Always use a microfibre cloth when cleaning.

I'd definitely consider upgrading using Hikvison Turbo. Same if not better picture quality than IP and for almost half-price. IP cameras cost more but you will be paying for feature that you will probably never use.

You gonna share mate?

Yes you can. Think it may be the chime volume.

Make sure you use a 3A fuse.

STOP THE PRESS! - It now appears POC power over coax is widely available so a psu is no longer required for Tvi cameras. How quickly things change in the world of cctv! The way i it see anything over 1080p is an unnecessary luxury. Fine if you are prepared to pay for higher pixel numbers but...

Personally I would look at Hikvision Tvi cameras rather than IP. They cost at least 50% less and produce the same results. Yes the install is not as “clean” as a power supply is required for the cameras but value wise you cannot go wrong.

Reason?

Hi Very old thread i know but does anyone know how to view the device signal strength? Also what is the minimum advised signal strength please?

I was recommended "quad" pirs. Never had a false alarm yet in over 2 years. dual techs are for garages and conservatory apparently. http://www.cts-direct.net/pyronix-kx15dq-15m-digital-quad-pir-grade-2-kx15dq-pyronix

4K version about the same price though. These kits are often to use up ageing stock imo.

his profile is set to not allow pm :-(

You mean this model mate http://www.hikvision.com/us/Products_1_10649_i8725.html Or the newer 4K version.

OK looks like the fault is f01 light 4, motor triac. https://www.diynot.com/diy/threads/hotpoint-washing-dryer-machine-error-codes-wf-wd-models.163622/ Does rocks1 still post on here?