Search results

we deal with these boilers everyday,i would change these legs because if they split it can take out fan and pcb due to water damage.You have done the hard part by taking legs off,£75 is cheaper than a pcb and fan :wink:

these do have problems with these boilers,leaking legs and pressure sensors go out on f75 but better than worcester , biasi ideal and all the cheaper models.

hi i have been to 5 different suppliers and they all come out with the same one

hi all i have a 1.9d van and had aleak on rocker cover,ordered gasket and took off cover.The trouble is the gasket seems to fit in a groove but my cover and head are both flat so no groove.is there any over gasket to fit.I have done a temp fix with a liquid gasket but not working very good.Any...

hi all i am trying to find a chrysler mechanic to look after my voyager 2.8 d 05 plate.I want to avoid main agent who tried to charge me £150 per hour ,not a bad living.thanks i am in essex around romford area but i can travel thanks peter

hi kirk was interested in the plans of w,y and s plans that you have if you get time would you be able to forward them on thanks peter

hi the best way to test diverter valve is to turn off boiler and let it cool down,once it is cool,turn on and run hot tap straight away.Whilst the hot water is running feel the 22mm pipe that is on your right as you look at the boiler.If this starts to get hot then your diverter is letting by peter

let me know how you get on i will look in my van may have spare one

we fit alot of these room stats and the recievers do fail alot.a easy way around it as a temp repair is to turn off power undo reciever and join wires 1 and 3 you can put them in to number 4 on reciever this will do away with room stat and you can work the boiler on its own stat.you will have to...

check pressure gauge make sure it reads aleast 1 bar if not top up system via filling loop

hi i have trouble starting it.Once started i can start it every day no problems but if i leave it a week i have to crank it for a long time and most times till battery is dead.I have changed glow plugs. It almost as if the fuel has drained out of engine and takes a age to get it back to the...

hi common fault on these the diverter has gone .Rubber has gone and does not let arm make on micro switch

posted in cc if that helps

hi have a problem with a boiler i went to today and i am not that clued up on these so some help would be great.The boilers fires up and runs for about 10 secs then stops,it then relights.It keeps doing this but does not go to lock out.It has the same fault on dhw and ch.No fault lights show.Any...

most likley that the plate to plate heat exchanger is blocked ,common fault with the se.

Thanks seco for that,horrible units these.Thank you once again pete

it gets off of temp but as soon as you run hot tap it runs warm for 10 seconds then goes cold thanks pete

Been called to this unit today.No hot water was the fault.After speaking to Elson they suggested to change the blending valve,but no difference.The sysyem is fully pressurised with abaxi solo 3 providing heat.Flow from boiler is hot and return hot.Both pumps have been recently changed.Could...

Tested the amount of time there is power to the plugs and that is 25 sec.Have tested the ohms all very low readings ,any other ideas thanks peter

thanks for the reply how long should they stay on for.