Search results

Is there any way to access the technitians menu without the password on a dennard 2040 PTZ camera. I know the default is 9999 but its been changed. I know i can go through them one at a time but is there an easier way. The user pass is still at 1111 so I can use the camera but would like to...

Singe stereo speaker ???????????????

remove the condenser and look into the hole...

See picture. I have a bit of wood in one of the catches to illustrate where they are

Open door , bottom left, twist clips and PULL... Then open the hidden flap and clean out any gunk thats in there.

For short runs one cat5 cable can be used for 2 connections as only 4 cores are required for each one,

Had an installer round today, he checked the flow rate with what looked like a plastic mug with a slit in the side of it that indicated 30 litres a min. At the kitchen tap. now waiting for quote..... thanks ..

ok ill try that tomorrow....thanks.

sorry about the negativity earlier Boiler is in utility room.. plenty of space and there is a sink nearby for a run off. flow rate from tap in yard 15mm pipe is 21litres per minute as for pressure ?? I will wait untill i find this out. the combi i have has a flow restrictor at 10...

how the heck do you expect me to know what the standing pressue is? it squirts a hosepipe about 30 feet? i have only one bathroom..

My C&M combi boiler is playing up again, and I am considering a replacement. But there are so many choices out there that I cant make up my mind. I realise that most of you will have your Favourite make but a few pointers wouldnt come amiss Large victorian house 5 bedrooms 34ft lounge/diner...

:( :( :( I knew there would be more to it than a clogged fan !! And there was.. Ended up replacing the front panel control PCB to fix the overheating problem :cry: :cry:

I thought of that but it gets you nowhere near the clips. In the end I had to release the clips I could get at then bite the bullet and pull it off. Worked out ok as it happens but that was not the end of my problems. But thats for another day... Fan is nice and clean now.

Its the very smelly oil based version. I have decided to get someone in to do the painting for me so I can let them worry about it.. Ive had enough.

This paint is past its best and is now peeling in places so looks horrible. However, I have tried all ways to get it off,to prepare the surface for a repaint but after trying sanding ( just moves the surface about a bit ) Heat gun ( just leaves a sticky mess ) Nitromorse ( not a lot of effect)...

The inlet fan has stopped drawing air as it is clogged up with dust. I can see it through the condenser hole but cant get at it. The grille on the RHS is held in with plastic clips that I cant see any way of releasing. I need to clean the fan as the cooling air is not being pumped through the...

Any ideas how much to repair it. I'm in the NE.

My C&M combi 80 has the following problem. The error lights for "fan running but pressure switch not operated" come on every now and then , not permanantly but just at the most annoying times, like when im in the shower. I have checked the hoses and made sure that both holes in the pressure...