Search results

Thank you everybody for your input. I have basic knowledge about electrics and I thought I have answered those questions in my previous replies , I am not ignoring them. I will do my best to answer them. So, a fuse board in the garage is off the menu. Since I first posted here I have learned a...

Hi guys ,may be a dumb question but will a consumer unit be better that the junction box? Something like this? Thanks

Writing on it says Firetrax Gold. Quick Google search says is a fire alarm cable. I salvaged it from skip same place where I got the led strip lights. The cable was attached to a double socket.

Sorry,it does have a 3rd bare wire,but it's not copper wire,it's silver colour. The other 2 have blue and brown colours . Is it ok to use? Thank you

Sorry,it does have a 3rd bare wire,but it's not copper,it's silver colour.

I was going to just plug it into a socket in the kitchen,but I can swap the socket to this spur if is better(see picture). The cable is cable tied to a wire that I put up between kitchen corner and garage(see picture). I can get some flexy conduit and wrap the cable in it if that helps. I can...

They are from a building site. It was end of the job and they were taking temps out,these lights were on corridors and they out them in the bin. So I salvaged them. They are LEDs and they work on 240. I connected them to an extension lead and they lit up.This is on the back. Are they ok to stay...

I was goin to plug into a single socket where the hob extractor was. Not using it anymore. But I can swap the socket to this spur instead if is better?

I think it will be easier to turn lights on from the switch rather than from a socket. If there was no light switch I would have used a double socket instead of junction box and plug everything in. But I like the idea of having the light switch and I'm not sure how/where to connect all the...

Hi all, I'm planning to run a cable from the house to the garage to power a few sockets and a few lights. The load cable will be a 2.5mm 3 core H07RN-F which will go into a junction box in the garage and from there will continue to the sockets. For the sockets I used a 1.9mm?(thats what the...

Hi all, I'm building a single skin brick garage. The garage is 6.1m long and 3.1m wide. I need some advice on getting the roof started. I'm planning to put the joists accross the shorter span and have the fall going towards the back of the garage. I will be using 47mm x 175mm C24 timber for...

Hi everyone. Last week I ran out of oil and I noticed the lockout light is on on the boiler. Ordered new oil which came 3 days later,but in the meantime I have turned off the boiler and the water pressure went down to 0. So, I tried to restart the boiler but no luck.After reading some advice on...

looking for tips