Search results

No that is fine if you use 18mm ply you just have too cut out quite a large hole to allow for connecting, no issue with this as I assume you have a cast resin tray as you bedding on sand cement.

Stick in another post code near you it will only show you the Plumbers in the post code you type in. :wink:

Your not really missing something, couple of points Get rid of the floor Boards Lay Ply 18mm WPB use 2 x 45 degree connectors to get to where you want to get to and if part of the problem is not enough room then turn the Tray. there are some wastes with a turnable outlet that will make the...

Only from the point of view that the pump will come on when any of these outlets are used, if you do not want other areas to be effected then you will have to have separate plumbing.

Sorry should have mentioned Salamanders are cheaper Though.

Whats a BG salesman? sorry for sounding thick. Whenever I get asked for a good plumber I tell people to go here As if it goes wrong there is a complaints procedure. http://www.iphe.co.uk/ The main problem as I see it with the Salamanders are when they fail in Guarantee (I sell Hundreds)...

Is the pump fitted in the loft ? if it is then that is why there is air vents. Make and model of pump would be helpful. With out knowing this I can only guess. Your air is coming from the hot water cylinder and poss the cold water tank especially if you have a small storage of water...

you can use the newteam 1000xt it is just thermostatic as opposed to your model which is manual.http://www.tapstore.com/acatalog/copy_of_New_team.html The only thing to be cafull of is if your hot and cold come in the left hand side there is not a replacement but if there enter on the right...

Cheers for that I am new to this so I live and learn....

I know what you mean I don't like big Brother either, Always been a bit of a protester.

It does sound strange as you have tried to slow the flow down and it has done nothing. The shower valve you can calibrate very easy to get the temp up I would be interested to see wheter if you recalibrate the valve you can exceed 40 degrees that is comming out of the bath. if you can then...

Hi Seco, Don't do spam I am a Veggi. Was only trying to help.

Ha rules rules rules. :cry: I will have a look at the oter posts.

I can not see how that will Work, If you go to our website and call me I am the tech adviser I will try to get to the bottom of the issue for you. ************ Best way as there will be a few questions to ask. Regards Tim P.s not here for long as I am half day.

Hi Chris, They will not increase water pressure they will bulk out the water with air and reduce the flow. hense Aerator. Very good if you have high pressure another also Known as anti-splash device.

Strange does this still happen when you turn the shower valve to cold ? if yes obvious one check cold storage tank has water, could be muck in the inlet.

If you want a quiet pump use a centrifugal pump, but be careful installing centrifugal above the cylinder as air is the big issue, I would use a Techflange or Essex and plumb anti-gravity loop as with image below.

This is a Anti-Gravity Loop With Techflange

I had a merchant / bathroom showroom for some 18 years now, a few years ago I started an online company and now we have grown to be in a position to be selling a very good prices and in a lot larger quantitys than as a small local company. I can no longer afford to sell a tap washer or as we...