Search results

And, should the ply have a hole or no hole

Let us know how you get on, I also considered Nest. One the plus points for Nest was the stat does not need batteries and it did get me thinking but a good deal on the price of Hive won it for me.

But you can see and change the wife's heating actions via the Hive over the net, also see what the heating ( house ) temperature looked like yesterday, last week, etc, You can boost either or both heating and hot water from the app if needed i.e getting home early.

This is interesting. I fitted Hive a couple of weeks back, before that my old system was a 1970 wall stat in the hall and a electric / mechanical type boiler programmer, 2006yr. Hive was a great step forward, the old programmer was very limited. Heating& hot water constant, hot water only, or...

Little point to remember, always ask for a Customer Contact number. This is your case raised number on Thames reporting system. Pete

So let's start by asking the make and model of the boiler Can you post a picture of said parts Are the two rads in bathrooms

If your old pipe is LCC, let the cutter do the work, don't over push, you can get away with cheap cooking oil as your cutting oil if you must.

I think I would look to get the boiler installer back to check it as its only a few months old.

Its possible that the White pipe shown is the problem IF it been incorrectly fitted .i.e part blocking the main stack if to long and not fitted flush in the boss.

These boilers are worth keeping if it's a simple fix and that's your only problem you have. I would get anther heating engineer to investigate.

Sounds like a loose connection. You need to arrange for a heating engineer to make tests etc

So, it was not firing up and cutting out then firing again etc

How did it act before

How old is the tank?

To replace/ renew this valve is a simple diy job. Shops like screwfix supply the complete valve, have a Google

As it comes with a lid, a diy tip for the expansion pipe; Cut a plastic pop bottle in half. The the lid, make a hole so the bottle neck just goes through this hole. Make a hole in the cap as big as possible. Push pop bottle DIY funnel through lid hole and hold in place with "holed bottle cap"...

You pay your money and ... Me, I would fit the 4 gallon polytank (screwfix) £25ish

Have you looked at the price of buying 5 yourself, £150 for 5 + fitting, + draining and refilling+ time etc = ubelievable price!

If needs must, and you can only drain down as far as the tee on top of your cylinder, it looks like you need to either if you are lucky and the tee is a compression fitting, undo the top compression, lift the pipe up and out or cut the pipe above the tee. Once lifted, drop in a hose and drain out.

Love the old Profile apart from the pcb