Search results

How can i tell if the cord or flex at the Immersion Heater is Heat Resistant and what is it rated?

Thanks woody.

Thanks John D. you are spot on. the old inhibiter is gone.

Thank you both. Now i have the info to bite the bullet.

Thanks Wood thats just the kind of info i needed to know.

Thanks for all your careful and detailed replies.

Ive seen somewhere that 28mm or 35mm alkethene or mdpe water pipes have ID bores of much less than 28 or 35mm. Is this correct?

What is the position on siting appliances in bathrooms? eg washing machine or D/W or Dryer?

Whats the distinction between casings and linings?

Is it possible to lay solid wood or engineered flooring without glue and just allow to float? What would the consequences be?

What thickness of chipboard flooring is typically used? The 18mm or the 22mm?

I cleaned out the ball valve of the F&E - grit - and the problem has stopped.Now to watch and wait. Thanks for the help.

Thanks again. i will get back probably on mon or tue, with further results or info.

Thanks for the good info replies: the water in the F&E is hot and the water in the cold storage is higher than the F&E. I'll have to check out the other questions. Not certain, but turning on the cold water taps seems to affect the F&E business ie simultaneous noises can be heard from the F&E...

How do you fix service pipework and wireing when (in this case) the two storey extension is built in beam and block flooring? Also, how do you fix plaster board to the beams?

the F&E tank keeps constantly filling and occasionally overflowing. It has a conventional boiler ( and a cylinder and Imm Heater is present in the system). The stat on the boiler and room stat seems to be working OK Any suggestions?

Spooked, thank you for the info.

Spooked, just remembered to ask. What do you do when faced with cut slates at a valley that have come loose ? Do you usually use a "hanger"( do you mean a strip of lead or is there something purpose made for slates?) I have heard of siliconing cut slates in place.

Spooked, thanks for the useful and intelligent reply. Now i know!

Spooked, what and how difference to job difficulty do you find in tiles and slates?