Search results

  1. A

    Push Button Toilet cistern sdvice

    If cistern takes ages to fill then dont look at the syphon. take lid off and see how long until full.
  2. A

    Terrible noise when cistern refills

    I was going to ask the same matey. There are literally hundreds of different float valves out there, If you post a pic, the forum will identify for you and instructions to replace. Al
  3. A

    Terrible noise when cistern refills

    There is a diaphragm inside your float valve, replace it. Al
  4. A

    Leaking Shower Valve

    Do you have rubber washers that sit against each face ? Al
  5. A

    Thomas Dudley Dual Flush Valve (manual)

    Im sure the TD (green plastic) will twist anti-clockwise as you look from the top. It should turn and click on release. Al
  6. A

    Taps red hot shower luke warm

    See if there is debris in the filters. If that makes no difference, I would be looking at replacing the cartridge (if your showers are identical, you could swap cartridge to test). Al
  7. A

    Pressure relief pipe

    no you cant do that. discharge should be ouside and seperate.
  8. A

    Thermostatic Mixing Valve

    connect a cold supply, connect a hot supply. connect the mixed outlet to the hot tap and adjust the valve to required temperature. done.
  9. A

    3/8 flush valve - how do i connect to 15mm pipe

    Assuming you mean float/fill valve... You can get an adaptor to convert from 3/8 to 15mm Al
  10. A

    Carrying out a Repair Without Draining System

    Use a bung kit in the expansion tank outlet.
  11. A

    10mm manifold confusion

    Bi directional TRV's will allow flow/return to flow in either direction, i guess that what you have just now, So as long as you take a supply from both flow/ret, you can pipe the new rad without worrying. Al
  12. A

    Connecting MDPE to stop tap

    Why not compress it onto the MDPE, then remove and have a look at the compressed olive. Al
  13. A

    Toilet Dual Flush Button Setup

    The easy way to check. Assuming the larger button is FULL flush and smaller inside button is the HALF flush. By flushing each, you could flush with cistern lid off to see what button causes the whole cistern to empty and likewise with half the water left in cistern. hope that makes...
  14. A

    Join my new toilet to the soil pipe.

    Would you be able to shift your black soil pipe to the right side, closer to the main soil stack. you dont want 2 90 bends, it will build up and you would definetly need a rodding point fitted. Al
  15. A

    washing maching and dryer outside in the garden pathway

    Pardon me, can you clarify your question ?.
  16. A

    Cistern siphon 1 push button fault

    It's called pacific flush valve. Available at www.lunns.net for just over £50 If you press down on the centre tube what happens ? is it stuck open or closed ?
  17. A

    Cistern siphon 1 push button fault

    Either a few pics or look for manufacturers name on syphon.
  18. A

    Cistern siphon 1 push button fault

    I'll hazard a guess, It's a SIAMP and the little hook at the top has jumped over the connecting rod. Al
  19. A

    Shower not being used, seems to be losing it's seal

    try a plug in the unused shower tray. Then you will know if smell is coming from shower waste.
  20. A

    How to stop a tap from leaking (cant remove tap handle)?

    I would guess that they have a ceramic cartridge and are quarter turn. Replacement cartridge usually required, but in the mean time you could, isolate supply, remove head and cartridge, place a thin fibre washer inside tap hole, then refit cartridge which will hopefully close any gaps between...
Back
Top