Search results

Usually a small old, if still in existence in your area ironmongers, you would be surprised at what they still have under 2" of dust. you could also try looking up cordons hardware, i think they are in nottingham now. they used to have shed loads of all sorts.

Unless I am on the wrong site the only area that is restricted to who can enter is the combustion chamber, and the main area of topic on there is work that only rgi's could out work on any way . thus preventing mr I can do that from blowing himself up. also most postings are requests for help on...

the kings span cut in between as tight as you can get it, will suffice it will allow a small amount of advantagess air to help in the void, expanding foam is a night mare and can have a pushing effect where you don't want it if you over apply. before fitting the king span,if you are working from...

could you engrave the numbers back on and then rub a hard wax into the engraved area to highlight it.?

EXPENSIVE try a local window fabricator you will save a a packet.

fill the void using some thing like kings span foil backed insulation solid. it would not hurt to use a vapor control barrier,or foil backed boards.

ties start above DPC

see if you can remove the rubber seal from the opposite side first then use a thin bladed scraper to remove bead from centre.

If you have sealed between the frame and the cill then you have sealed the concealed drainage channel, and it would be wise to remove the sealant or the water will back up to the inside of the frame causing untold problems.

you could carefully try nail polish remover. white cloth only or the colour will bleed into the profile. or scrape very gently with a very sharp blade but if you get it wrong you could end up scratching the frame with the blade.

this piece of land is whats known as a verge strip and utilities companies have the right to dig them up to carry out maintenance or laying works. they do have to make good to the disturbance but only as was original so your friend has about as much hope asking them to tarmac it as winning...

[ :shock: :?: did I miss some thing

if you want to make sure its not going to drop out and scare the shyte out of you add two spring clips to it as the magnetic catches can release in the event of a shock or vibration ( and I don't mean an electric shock ) :lol: for the smart ones out there.

post a pic of opening you wish to fit doors on

Even to fit this one window if you are not fensa registered it would need you to submit a building notice for building regs. and most authorities would expect to see some support above an opening even a small one . and even if you are fensa registered and fit a lintel this is structual work...

no regulation that says you have to fit restrictors new windows now have to comply for fire regulations. not an argument i would get into on behalf of customer. land lords pay the bills not tenant. so keep landlord happy.

I have just looked on data tag inside boiler" I lied" not intentionally it was jan 2002 installed but still older than 5 years actually 7 and still going strong (fingers crossed) so that means I have not lived here as long as i thought i had ( so where did that lost year go :shock: