Search results

So would you say that it could stop my false alarms when I change the battery. When you say all the batteries do you mean there are more than 1 ? I thought there was just the one in the main panel??

Hi again. I finally got around to trying this and it was fine for a couple of weeks but last night it started again. If the battery was failing could it cause a false alarm and would it most likely be on the circuit with the longest cable run ?? The battery has been in since installation...

Hi guys. Hopefully just a quick one for you. I am having a problem with false alarms on a particular zone. The zone contains 4 door contacts and a sensor (dual tech I think). I have this zone on a chime circuit. The zone keeps chiming through the day when I shouldn't and it also follows that it...

Can I pick your brains. My mates kitchen has a cooker switch feeding a double socket with prob 4-6mm t&e. Can I alter this by swapping the socket for a cooker connection unit for the hob (no plug fitted) and run another feed to the socket to feed the oven (plug fitted) Cheers

Why not screw through the ply from the inside ??

Just a thought but if you do fit your skirting to the carpet, just think how easy it would be to hide any cables. Pull back the carpet lay your cables under the skirting then carpet back down.

Hi guys I'm in need of some advice. I have been given 5 boxes of Hilti HSL-3 M12/50. Does anyone have an idea of the value of these. Many thanks guys

im with 3 and had really bad signal at home for years. I threatened to leave them and they eventually agreed to give me a "home signal box". This connects to the internet and act like a mast in my living room and gives me full signal throughout the house. I think all the companies have a similar...

Thanks for all the pointers on this. I have just got round to sorting it. I have taken a real easy way and I just activate the chime on the circuit and switch it off before I go to the man cave 😃😃😃😃 Once again thanks for all the help.

no problem pal thanks very much for your help

got to take the kids to a party tomorrow (what fun) if its easy would i be able to follow your instruction ? then i wouldnt need to keep you and could do it when i get home next weekend no rush then and i wouldnt be putting on you many thanks

yes pal what i want to do is program2 for zone6 only so it could be set all day unless im in there

gosh that was quick yes i have both manuals from what i have read the only thing i would need to change from factory settings would be the entry/exit delay we have it down to 10 sec as the panel is right by the door. many thanks for your continued help

zone1 front door 1 contact zone2 living room 1 pir zone3 dining room 1 pir zone4 kitchen 1 pir zone5 back bed 1 viper zone6 shed 1 contact man cave 3 contacts...

Working away. Should be home tomorrow or thurs. will count up and let u know. Thanks for the help

The problem with almost sticking to the default is that I only want 1 zone to be active on prog 2. So my "man cave" is covered through the day so all tools plasma and ps3 are safe ;-)

Yeah pal no problem with the setting and unsetting just can't get my head round the programming of prog 2. Must be stupid but all sounds like gibberish when I read it. Lol

Thanks pal I've got the code and the instructions but there not easy to follow. Hopefully I can get an idiots guide to do it. Step by step. Once again thanks for your help so far

Would I (with the manual) be able to program it so program 2 will just set the sheds and leave the house unset whilst leaving program 1 to arm everything ?? Thanks for your help ;-)

Sounds a bit complicated. Lol Can I set the system so I can arm zone 7 and leave everything else unarmed, then full set at night. ??