Search results

to be fair it is a solution though isnt it, although i would have thought they are sealed for a reason

fair enough, i have searched on here but didnt come across that specific subject, whats going on in that video then?

what about this seems to work http://www.youtube.com/watch?v=oXJhmCQGNEM

guess it cant be done then, i have a vague memory of a company advertising this service but cant find anything about it anywhere

hi guys, does anyone know if its possible to re seal a dg unit i have a few that have foigged up and wondered if there's anyway other that buying a new unit thanks Bill

cheers mate appreciate the help

just another question why grit sand is there any reason to use this other than building sand, also not sure if this is relevant but i am laying the slabs with a wet mix not a dry bed does this amke a difference thanks appreciate your help

[/url] thanks for the reply, thats where i looked originally and it seems to say that you can use a 10-1 mix, 6-1 mix and a 3-1 thats why i was confused,

blimey nobody knows, did i post it in the wrong section?

hey guys i am laying a patio and the ground is a bit uneven but need to set the slabs in about 2" of mortar, im laying about 20m can someone help me with the ammount of sand and cement i need to order and also what ratio should the mix be i have been told i can mix 10-1 is this right seems a bit...

hi there does anyone know if the above exist please, the ones i need are buff colour thanks Bill

i am replacing my patio and i have taken up the old slabs, the ground under them is quite firm and i will be ok to lay new slabs there but the ground over the whole area although firm is not level it undulates....only slightly but it does, firstly do you think its necessary for it to be level...

would it be a good idea to jetwash the old slabs first ?

sorry i should have explained there is no dpc, i am laying this next to a static caravan. can you explain how i make sure that the slabs run parallel to the caravan, as there isnt a wall to run along, i dont want to get half way across with the slabs and find that i am at an angle to the van, it...

hi guys i have an existing patio consisting of 2x2 slabs and would like to cheeer it up a bit and put down some different slabs, am i right in assuming that it will be ok to lay straight onto the existing ones?, they are very solid and show no signs of movement at all. thanks Bill

the satellite is the astra i think its 28.2e and , as i said before i have a signal strength of 70% .....if this doesnt mean i am pointing at the satellite then what does it mean? i do not have a meter, but i have tuned this in before a few times without one just seem to be having problems this...

sam, yes i do mean dish, i know that it should be pointing south and a little east according to what i have read elsewhere, where i am confused is i thought the strength referred to the strength of the satellite signal and quality referred to the connection between the sat box and the tv, is...

got 75% strength but nothing on quality i have checked the coax connections and even changed the scart cable but still nothing. i am assuming that i have the sat pointing correctly as the strength is quite good cant understand what the prob is thanks Bill

just an update, it wa the turbo apparently a screw had worked loose and got into the turbo, got a recon one and all fitted for abot £500 so a lot less than we were orignally thinking, thanks for all the help Bill

well apparently the guy driving it did stall the engine quite quickly so maybe that has saved it, but i thought the reason it wouldnt start might be because there is no oil left in the engine and its seized, do you think that might be the case? thanks again Bill