Search results

Blaady hell.....thats cheap !! :shock:

i use both....mapp gas most for outside/large pipe...ie gas runs mapp can also help sometimes when u can't just get rid of the last bit of water in the pipe. i carry a roll of leaded and unleaded..... (keep the unleaded for show..lol) (not really :roll: )

incl materials....not miles away from reasonable

Any one fitted the Water softners.. got a customer who wants whole house water softner of the type that does not need topping up with additives ? any ideas on make/model any thing to look out for ? ie w/b boiler fitted with ali exh....softened water at the kitchen tap ? cheers

not used either..is it leaking from the rad seems? or from a compression / nut that could be repaired? could you just turn the rad off for now by closing both valves?

or isolate the boiler from central heating!

you can follow the pipe and see if the is a "T" off to the cooker. Or get the cooker fitted by a gas eng so he can make all relevant checks for your safety

have to agree, why rip someone off for whats most probably no more than 30 mins work.

might be a leak from the bath waste ? the flexible connectors i use from toolstation have worked everytime...dont get the cheap ones...they are about £3.50 -£4 each and they do two diff type of ending to suit your situation

thats what i'd do...carefull not to do it too much at tap ends as you might end up with taps too near the wall

been fine for 5 years.....why you asking now then ?

even better, loop the hose you use to drain down, over a downstairs door, that way the downstairs rads can't empty

what you mean temporary repair....done some years ago and Plumbers Tape For Everything still holdling good !! ;-)

i can see gregers" how you might be dissapointed...i'm glad i got one !! ;-) Some times it's hard to believe how folk get conned out of monies seemingly so easily... different generation i guess... anyway, she promised to come over once her mother was better and that we will be very...

Hello My name is Augustina i saw your profile today at(diynot.com) and became interested in you,i will also like to know you the more,and i want you to send an email to my email address so i can give you my picture for you to know whom i am. Here is my email address([email protected])...

hard to say without seeing whats required..if its leaking from the the cistern to flush pipe joint then maybe undo it...refit it with some ptfe...this might do it but they are not normally flexible, so i'm not sure if you might be refering to the pan connector. take the boxing off...check...

have to agree with bahco...shouldn't be that bad...cutting out and replacing a bit of ceiling is not that big a job (if thats whats required) you might damage the first run of tiles, so have some spare ones

if its a normal combination cylinder with cold storage on top of the hot storage...u have no chance of running a power shower from it

http://www.multikwik.com/catalogue/14/wc-connectors.html

any power to it when you switched the power on ?