Search results

i would. why noit have have belt and braces

full of air ?

no, turn the knob on the left of the white key till its off then remove key

if a tsv is the same as a trv then, check they are bi-directional, in which case it does not matter

make sure the water is off..so your filling the boiler anymore. then turn the key and pull out. some water will escape, but a very small amount

yes your thoughts are fine...slight incline to air move out. to drain, drain hot water via a open tap. drain hot cyclinder by undoing the top connection, insert a length of copper/plastic pipe to a couple of inches of the bottom, connect a hose to the other side...take the other side of the...

several things come to mind. when you say small cylinder, will it fill a bath ? take the feed from those two pipes, but flow might be less than perfect. vents should be in 22mm

worcesters do plume management kits, but best done by a corgi person

the manufacturers website normally have downloadable literature

in my view, much the same. I use quinn all the time with out problems

i use silicone to help secure the bath its a good adhesive, it a second defence against leaks down the side if the bath. i also use upright 2x1 and brackets where required

i recall fitting one of these. i ended up getting a new waste cos the provided waste did not screw onto uk traps. the waste need not go through at an angle...could left or right strsaight through the wall......if you want it angled then its more work and no easy solution. if you end up...

yes...otherwise you'll get false readings from your ls valve

the are some knowledgable folk on this website/forum http://www.navitron.org.uk/

if worried put some x400 in for a couple of weeks and then drain down a couple of times (having ran the heating for 30mins in between)..then x100

ignore dave and steve, i'll come and powerflush for £500 including travel time from leicester

:D i like country and western. i must be a ****** :cry:

seems i'm the cheapest...will have to up my rates...or is it that leicester folk are mean with their money

looks like one

a bit expensive if you were in leicester...we are doing one today and tomorrow...power flush, 6 trv, magnaclean, old cylinder out and baxi duotec 28 combi into the airing cupboard - £2250