Search results

it shouldn't have turned off in the first place i hope! is it running on batteries?

ok, then it is a loop tamper. if you want to, DISCONNECT MAINS SUPPLY, power light on keypad should turn off, then open main panel, tamper should go off. silence at keypad. then find the loop tamper terminals on the main board marked TAMP and disconnect all wires from the terminals. then...

is a zone lit, if so, what zone does it correspond to?

ok, then one of the sensors has a tamper fault, what kinds of sensor do you have in your house? door contact, movement sensor, shock sensor?

there will be a tamper fault somewhere in the system, when it goes off, does the external bell box sound?

alarm, I was talking to the OP, not you! I did make a mistake forgetting there was mains, but there you go if I'm an amateur. shock sensor blinks at night because you can't see it blinking in the day?

ok we are getting somewhere now, if you are feeling up to it, open up the main panel, THERE WILL BE MAINS POWER, the tamper will go off, put in your code to silence it. take out the tamer wires from the tamper terminals and fit a small piece of wire between the terminals to short them out...

paranoid? me? nah!

I know you weren't, it was the regulars who only like to start arguments.

Hey, don't start on me please, i'm only trying to help!

The processor couldn't have gone after that amount of time, if you wanted to, get a piece of wire and put it so it shorts out the problematic zone terminals on the main circuit board, then try arming the system, if the fault has gone, then the PIR is broken. if the fault hasn't gone, the...

oops that was the wrong account! that was supposed to by post but rigidraider forgot to log off the computer!!

If you want to know, Accenta G4 Mini, LCD RKP, Extra LED RKP, Risco Novagard 6, Old PIRS, No door contacts. Texecom Veritas 8 Compact as test rig for various devices acquired, I.E, sounders, speakers, strobes, PIRs and others. That's about it!

Hi there, looks like a good enough shopping list. you will need 6 core for the keypad to the control panel. 7AH should be completely fine for the install. for suppliers look at security warehouse.co.uk, they are pretty good and should have everything you need.

no, a bellbox and pa aren't on a zone, they each have their own terminals on the board. pirs, door contacts, shock sensors, glassbreaks are on their own zone. the keypad also has its own terminals and you could buy additional pirs if you needed

the kit seems to be missing a keypad, you'd better contact them and ask if it comes with a keypad. probably does but pic doesn't have keypad on! sorry my bad just notieced one!

yup!

Texecom Veritas are great little panels, if I was you I would go for a veritas R8 with a menvier SD1+ speech dialler.

yeah, had power to it couple of months ago, then it went dead! no life from it ever since! oh well, was manufactured in 2004, so no chance of swap under warranty! never mind, I'll get a new one soon, OH4W, same as before for the new accenta G4 I'm installing soon![/youtube]