Search results

  1. E

    need a bit of advice on a main heat only

    need a bit of advice on a main heat only
  2. E

    Ideal Istar HE30: LF fault & water leak from exchanger.

    part number 171031 wil ldo to replace leaking rubber seal on plate heat ex
  3. E

    Ideal Boiler LE fault NOT PCB

    overheat stat causes LE also
  4. E

    Baxi duo tec he24 CH but no hot water, no error code

    have you checked the pipework to see if any of the pipes are getting hot?
  5. E

    Ideal Logic VS WB 24i Junior - Discuss

    first of all i would go with what your plumber recommends as it will be him you will be phoning first if anything goes wrong secondly is he gas safe to be able to do the job?
  6. E

    Ideal HE30 issues

    you get the leak fixed first or if you want heating isolate the cold feed to the boiler top boiler up to 1 bar all will be ok if you cant do any of these pay someone who can
  7. E

    Isar HE30 combi central heating

    diverter head check first if you dont know what this is pay someone who does
  8. E

    problems with an ideal logic plus boiler

    i have fixed loads on the logic but none so far on logic plus yet they are the same hex
  9. E

    Ideal isar again

    check the system by pass check the rads are open check dry fire as well check pump
  10. E

    problems with an ideal logic plus boiler

    could be your hex is leaking
  11. E

    Metal body /manifold type diverter valve in Ideal Isar

    if its got a black diverter head it just unscrews part number 175411
  12. E

    Anybody had experience with Carillion

    08000647031 try this number offices have changed to manchester
  13. E

    Boiler dumping ALL water out of condensing pipe?

    heat ex gone this is whats happening to the logic's
  14. E

    Ideal Isar taking longer to heat up DHW

    173624 is the part number for the grey headed diverter valve kit phone ideal give them your boiler details and they will tell you the correct part number
  15. E

    Ideal Isar taking longer to heat up DHW

    they are telling you its the diverter,plate or dhw thermister,call out a decent engineer who will diagnose and fix the fault instead of guessing what parts to chuck at it
  16. E

    Ideal HE18 not lighting

    h5 means problem with jumpers as for boiler going on/off maybe poor electical connection. there is plenty of good engineers in the surrey area on this forum contact one of them to fix this fault.
  17. E

    ideal isar he35

    call a decent gas engineer and he will be able to fix it or if you are gas safe post this in the cc and i will tell you how to fix it
  18. E

    Ideal isar m30100 combi broken, trips when try to power on

  19. E

    Ideal isar HE 30 +programmer XF 2008

    why did you order parts????/ spend a few quid on a good rgi would of saved you money on parts, he would of diagnosed the fault you should never go on the internet on how to fix your boiler get to know a decent rgi would be better or a fixed price repair would of been cheaper
  20. E

    Ideal isar HE 30 +programmer XF 2008

    you have the isar with the brass manifold it will be a black headed diverter not red or grey
Back
Top