Search results

Unusual as it may be, I agree with Banal here. Please rewrite your question, as it is very difficult to follow exactly what you are getting at. Is the hob electric? If it is there's no way it should have a 13a plug on it anyway. Thanks.

He wants to replace a DSO with a 2G width accessory comprising a socket outlet and an isolator or S/FCU to feed a new under-worktop socket. I think!

What you want is a combined socket outlet and switched FCU. You can't get them :( :( :( Every month or so someone pops up on here, asking for exactly the same thing, so you'd think manufacturers would pick up on this gap in the market. You'll either need to fit a dual backbox, or use...

the "cooker switch" trips? What are you talking about? Is the thing that's tripping a circuit breaker in the consumer unit? If so what rating is it? (B32? B40?) Is it an RCCB (RCD) in the consumer unit? Does it have a test button on it? Is it the isolation switch for the shower that...

Spur a switched FCU (fitted with a 3a fuse) from the socket and feed the fan from the load side of the FCU. (Disclaimer: I'm not familiar with the regs in North Korea)

Hmmmm, still no answer. :roll: :roll: :roll:

Thanks for the info, I thought that the ETCI had adopted BS7671 in it's entirety. Every day's a school day! :)

:roll: by 'Idle' I don't mean the speed at which an engine is running, but it running without a load. A diesel genset could be at full output but it's speed won't change. Diesel engines on gensets are specifically designed to run at a set frequency depending upon the bus frequency and...

Ha ha ha! Ha ha ha ha ha ha ha ha! :roll: BS7671 does apply in Saudi Arabia, as it does in many other countries ranging from Ireland to Trinidad & Tobago.

Yes. Yes they do. :D

Let's see then, your first four posts (as I'm asking you to explain what you know about phase rotation) say: Now none of those explain phase rotation. I don't know why you're getting so arsey about my question, you say you know all you need to about phase rotation, and I'm giving you...

Come on then mate, tell us! If you're wrong we can correct you before your big interview. :idea:

Eric, simply move to a slightly more massive planet where a due to gravity is exactly 10m/s/s and your worries will be over!

They can just sit on the board - no enclosure necessary. Why not a 20way CU? (You do know that a 20way board is twice the size of a 10? :) )

You'd take a radio off the shop floor because there might be a puddle on the floor and the power cable might fall out and it might go in the puddle and someone might put their hand in the puddle whilst the fallen-out power lead is in there? Not the most likely scenario really :roll: (and it...

technically speaking, 1kB = 1000bytes, 1kiB = 1024 bytes....

Just be warned mate, that idling a Diesel engine for long periods is NOT good, not good at all! :!:

Well in that case you should have no problem explaining phase rotation then! Go on, give it a crack now. Tell us all what you know about phase rotation.... :?: PS. Even if you do find a snappy little sentence to reel off, there's a chance your interviewer might ask you to go further...

I am very vocal on this forum with regards to people who attack posters for asking questions. However, in this case, you are attempting to gain a job working with something you do not understand, and you have stated you don't wish to understand it, merely find a sentence you can memorise and...

So do you test to see if it's necessary or just whip out the G/Y?