Search results

radio system each device (PIR sensors door contacts) are powered by batteries and transmit there condition to the control panel via radio. to disarm / shut down your system; get yourself some screw drivers first get yourself a ladder to get to the external sounder remove mains power...

i gather your system is not connected to an ARC (monitoring station). so if you wanted to replace the system with another system you could without much hassel. as your PIR sensors are radio, there are a few GOOD radio based alarm systems out there from local suppliers in your area, get a...

get a viper or a door contact on the window. that will do it Oasis

like Alarm i am a fully trained and experienced security, fire, access control and CCTV engineer managing director of my own business, have trained as an electrician fully qualified and experienced within the field, (commercial and industrial) migrated away from heavy mains to smaller grade...

you can run your aalrm cable with Cat5 without any problems as its class 3 cabling (SELV) so no probs there. so you mate works for Secom, i suppose he would go for a Galaxy G2 or GD 48, well to be honest if you had one of those fitted you would never need another alarm!! we only fit G2...

aux 3 should be ok, we obviously take our supply to sab from the 100 rio end as there is a specific 12v for the sab wiring. have you disconnected the SAB battery? if you have what do you get on the 12 v pos/neg at the siren? if it 12 13v change the battery (sab battery) if it still goes...

you can get some good equipment from securitywarehouse (sorry have not got there full address! and you can do the job yourself. the basic system comprises of the following main panel, or end station, (big box with all connections, batter etc) keypad or two depends what you want/need...

the way we do it with clients who want to fit there own is this; if you have a fault with your alarm, that you fitted, go to the mirror and shout at the installer!!!! if you have a fault with your alarm ssytem fitted by us, or any other pro installer, you call the service number, quote...

sounds like your external siren is kaput!!!! get a new one, or you can do the following; connect the wires back into the panel, go up the ladder, remove the cover from your siren, remove the wires, SLOWLY so you don't short the pos and neg, check to see if you have 12 to 13 volts on...

check voltage at panel with bell box connected, it should be 13.4 volts ish it should not be 6 volts!!!! remove the bell box hold off (12v) ensure tamper circuit is defeated nad return the panel to day mode, (engineer code + esc) then repost with you results, or call me and i will talk...

PM or call me, i will put you in touch with someone who can help you out Oasis

call me and i will point you in the right direction, or you can PM me if you want John Harrison of Oasis Technical Services (southern) ltd

disconnect the strobe - (negative) connction in the panel. Oasis

the system might have cost upwards of £1500.00, but it depends HOW it was set up! i (and a few of the pros`s here) have been called to sites that had a pro system installed by one of the big national companies and found it to be blow adequate for the protection of the property. you also...

happy to be of service!!! Oasis

the other board within the old panel, was it connected to the initia sensors? if so it could be the analiser board if you dont have that in place the sensors will not work but again you could have an ID biscuit system as is posted above, (hate em with a passion!!) Oasis

Kirkgas i also joined on the 26th december, but in 2009! but it is sometimes funny here, other times it just annoys the hell out of me! Oasis

had my first tattoo at 18, have now got both arms `sleeved` does that make me a bad person? i like em, my partner likes em, some narrow minded people dont! i am a successful company director, own house, cars, my Harley and all the other stuff you expect, also am a member of a MC...

as you look at the keypad, keep the cover flat closed, place small terminal screwdriver beween the base and the keypad not the wall, the space between the keypad and the base! lever the keypad off, slowly!! there you have it, remove connections, (noting were they go) dont short...

as usual i am at work!!!! but then again, i really dont give a monkeys about christmas!! Oasis