Search results

I often earth one end only of the SWA if i am running a sub main which is going to be put on a TT earthing system. Has always passed inspections.

Most apprenticeship providers request a full colour blindness test before your allowed onto a course if you fail you dont get in.

My map shows a piece of open water called the English channel between us and Europe. If some idiots hadnt created the chunnel we would have 0 connection to Europe.

Pretty sure its the tutors and students at fault not the course.

Unless the landlord is s fully qualified spark how do you propose he proves that safety? you guessed it Certification. Law maybe doesnt state it has to be certified but its pretty much the only way your going to prove in a court of law that the installation was safe.

Why does the rcd need to be rated at 10A an rcd is not a overcurrent protective device so wouldnt a http://www.tlc-direct.co.uk/Products/WYWRM40slash4.html work when combined with a 10A triple pole breaker?

Depending on the cable size installed and its installation method and the rating of the switching for these lights you could probably put the upstairs circuit onto a 10A MCB. This however would be Notifiable and should be done by a qualified electrician to ensure it is safe to uprate the breaker.

The Landlord has responsibility to ensure they are safe to use, this applies to the fixed wiring and any appliances supplied. They will be liable in the event of a fault if they cannot prove that they were safe and the only way to do that is to have a competent person look at them. Most letting...

Probably would be notifiable seeing as it wasnt just a faceplate change. Surely it would have been much easier to just change the backbox from a double to a single and fit a 3 gang switch which would take up the same space as a single gang plate...

Maybe if they didnt sack their managers every 5 days they wouldnt be so ****, must be hard on the plays to have to adapt to different coaching styles every few months

Depends where the customer wants the light and the level of disruption they are prepared to accept.

Dedicated Server line and interneal network at a guess

This is because firms know they can get away with making each person do their own work plus half someone elses so they can save on labour.

Depends on the quality and type really now. The older stuff was pretty rubbish, newer stuff has all sorts of **** in it to make it stable in sunlight

http://www.tlc-direct.co.uk/Main_Index/Consumer_Units_Index/CP_Range_Main_Switch/index.html I like these personally. Cheap, Good Quality Gear shame that Contactum is now in administration.

Theres the problem, CEF are known to talk alot of **** while not having a clue.

most of us would rather not get fried because some **** made a bodge of it then got his mate to check it for him, and by check we mean just put whatever will pass down on the cert.

pretty sure if you do a NVQ3 they will give you Approved Electrician with that lot.

give Elesca a call, much better service than NAPIT and no silliness.

same for near enough any job at the moment, isnt a fun place to be but if you let it weigh on you thats when you start to lose, been there myself always had to keep hope up or id just bottle it. Best of luck mate, hope your efforts pay off.