Search results

In one picture I see a white pipe that looks like it will be a condense pipe and needs to have a fall on it so that probs can't be moved

who said anything about a TRV. And a PRV is on a pipe from a boiler or back boiler and it is used if the feed becomes blocked as the coal back boiler has no stat.

see my post above

http://www.ebay.co.uk/itm/like/121162638557?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0 drain down and fit one of these this is the replacement for what you have

do you have a coal fire with a back boiler? or a gas back boiler.as that looks like a old style prv not used much now as the discharge the water all over the floor ( but you can still get them)

i dont think worcester offer a fixed price repair on a dirty system like that, by the sounds of it its not on the plate as the heating doesnt work aswell. i would say the pump needs removing to see how bad it is. but the divertor and hydroblock might be full of crap. a few hours and a bucket...

That valve can't be found anywhere it's been obsolete for many years. All you can do is replace the boiler. We have been looking for them for a while and nobody has any . You may get lucky ringing small suppliers to see if they have one on a dusty shelf.

Bg don't use the internet for parts and also why are you paying for a cover if they won't fit any parts? Money for nothing if you ask me.

The pcb is faulty the relay is failing on it, if you order another one look at your old one first as you can get a 1 fuse or 2 fuse pcb

Screwfix sell them and have depots wickes sell them and most other places would

Minor works for electrics what is one if them. I can work from the fused spur to the boiler including controls without one of them.

if your boiler was condemed nobody is going to tell you how to turn it all back on

Can you take a picture of your Hotwater cylinder please . Also did you turn your time switch on before pressing the override button ie turn your heating on then press button

Solid light is fault I googled it you Need to rebind your receiver ( press override does your heating work then)

I think a flashing red light is fault ( I'm unsure) try hitting the pump with something and see if it starts going again. Isn't the 330 a combi? I don't deal with British gas boilers a lot I know it's a glowworm. Surly it wouldn't be on gravity Hotwater Have you got a hot water cylinder...

That's what I would do

Cold pipe on heating pipe or a mixer tap / shower passing

It a plastic cover that is open at the bottom to let the water out if you remove it you will see a copper pipe ( they use this instead of a wire cage as the pipe doesn't get blocked with leaves) it is perfectly legal. And it's proberly just needs the vessel charging properly as none of them seem...

If it's on Your property ( check land register) then yes they have to make good

At 1.9 m in the floor void even with hatches and clips etc the fall would be to great for the space ( including the non combustion regs etc) your best bet would be to get a Worcester approved gas engineer who deals wit these everyday and they could tell you the best options for your boiler