Search results

Radiator in living room will only get hot when the one above it in the front bedroom is shut off.As soon as I reopen valve on the bedroom one the living room one stops again goes cold.I have bled the system several times and problem persists.any ideas.

Ok mate cheers ill try altering it all back first and see how that goes.

Yes will be changing taps for normal ones.I just thought if i moved tank into loft and increased its size I could get a better flow rate as well.Thanks to all who replied.Very helpful people.

Cheers foe the advice mate I will be doing this myself this time.Could lifting the cold water tank into the loft increase flow from taps,and how big a job would this be,or is it better to install a pump and where in pipe work do you fit this.Again thankyou.

Not sure why hes used 15mm probably to be the easiest as hes also used push fit connections on all taps and pipes,Taps are 1/4 turn and I think these require high pressure to work ok.

just had new bath room fitted and now getting very slow hot water flow from both taps.Have tried forcing out air and this is not the problem.Water tank and cylinder are in airing cupboard about 2 foot above taps.Plumber has used a short piece of 15mm plastic pipe on hot bath tap.Cold feed to...

New cooker is rated at 7.0kw.What is correct cable size,I thought 6.0mm T+E on a run approx 10 mts with a 32amp type C breaker would be ok any comments welcome.

Putting in fan and would like to know if its possible and how to wire it so it works off both the light switch and the shower switch.Doing it this way so it can be used from either one.