Search results

No need to reset the boiler as it's working. The valve sounds like a 3 port so when a hotwater demand is called by itself then the valve is not used. Voltage goes from the programmer HwON to the Common on the cylinder stat. So to check your clock simply test for voltage at the stat. If you have...

turn the heating off but leave the hot water to constant. Does the boiler fire? What set up do you have 1 x mid position valve or 2x2 port? Nath

Try putting a 1/2" fibre washer into the backplate. Nath

A pressure reducing can be fitted and a mini expansion valve should sort the problem, around £50 in materials and fitted as close to the stop tap. Nath

And do both just have 2 pipes going into either end?

How many motorised valves do you have? You should be on a s plan 2x2port valves or a 3 port with a extra zone valve on the pipe leading to the cylinder. Nath

No worries, hope you get someone who will sort it for you. Nath

Yeah. That activates the microswitch to tell your boiler the pump is on. Nath

Have they checked the differential pressure diaphragm?. It could be sticking. Nath

Not had much dealings with the 24i Rsf Tony just the 28i but sure the overheat is near the front on both models. But I could be wrong! Nath

Sorry Dan I couldn't make it out. Seen in now all with the power of zoom. Sorry William I need to shut up and go to specsavers. Nath

Your welcome. Glad you realised from means front. Nath

I'm just looking at the picture of your heating zoning set up. I'm just trying to figure out which one it is. Defo not S Y or W possibly a fully pumped c plan but the zone valve should be on the heating and the 2 pipes dropping down seem to be going to the cylinder? Nath

Top of the boiler on the left hand side near the from. It will be stuck up if it's tripped. Push it in and it should fire up. Nath

More than likely the shower is passing. How long has the shower been in? Nath

Is the boiler hot and cold piped connected? Or just the heating and gas? Nath

Is there a model? Is it a private landlord and if so is it through an estate agents? If not then get in contact with your local council they can help in times like these.

What boiler do you have? Nath

Hi John, thanks for replying. I removed the rear seat but I couldn't see anything apart from what looks to be a plastic section, not sure if it comes off tho. I will take a picture tomorrow mate.

Hello, I'm after some advice on the named car. How will I get to the fuel sender unit? Reason been the fuel gauge isn't working. Thanks Nathan