Search results

I have 1/2" rebated doors. No chamfer required.

if you have a handle on the outside of the door, just replace the 8mm "split" spindle with a solid one, most master locksmiths would probably give you one FOC! remove the 2 screws on the inside handle and pull the inner and outer handles away from the door. there will probably be both half...

Here's what I did... http://opposite-locksmith.blogspot.co.uk/2012/07/french-window-door-hanging.html

You have many options! Firstly the cylinder. if you don't know who has keys, then obviously they need to be changed. get one with a kitemark BS EN 1303: 2005 Anti bump, snap & drill cylinders all offer useful upgrades from attack. my preferred method would be to change the handles as...

the webpage is only a basic overview. I'm not sure a bs 5 lever deadlock should be fitted to any dwelling over the 2nd floor for fire escape regulations?

This is not a new idea - It is a simple common entrance pin set. A simple Master key system would have a master key, sub master keys and servant keys. A cylinder could also be made to let all keys in the scheme work it, for example, an entrance door - known as a "common" entrance door. A...

can anyone point me to the manufacturer please? thanks

I can't find the exact model - only a similar one the karizma plus - this one has a more simple LED display on keypad photos here http://opposite-locksmith.blogspot.com/2012/02/karizma-alarm.html

Box, I meant box! the alarm wont set, and I think I need to clear the fault codes - can you tell me where I can find installer instructions?

Bell boc seems ok can anyone help with the programming? keypad shows IFLt is there somewhere I can download installer instructions? thanks

Hi, I'm sure that's what I did! the keypad display went to a "-" so I powered it down to seek help! ill double check & get back to you! (its at a late friend's widows home) many thanks

hi, a 10 year old Karizma Thanks

speak to Nigel Waters. He is a upvc lock /handle specialist and will give you the best solution... Nigel Waters Hardware 0161 285 9701

Hi I'm Changing a old faulty bell box for a new one (odesey) the terminals do not match up. can anyone confirm the wiring please? old unbranded box:- HOLD + HOLD - TRG TAMP R TAMP N (NOT USED) STR new box;- +VE -VE BELL -VE TAMPER 0V -VE STROBE some are obvious...

so it's you and Mr Hobbs in 1851 who have picked a Bramah?!

Hi. as previously mentioned, check your own insurance documents - they all vary in what is required. here is a a guide made from Master Locksmiths Association and the ABI http://cusworth.net/wp-content/uploads/Guidelinesforsecurity.pdf common sense roughly as follows: All windows...

This may be of help to anyone having trouble with their locks http://cusworth.net/resources/upvc-door-maintenance-and-care/ and http://cusworth.net/2011/07/the-most-common-upvc-locking-faults/ remember to start work early in the day - if you break something, there is time to call help out!

what would be the best course of action? a reverse flush? thanks

Ah... I was wondering who would be the first to see my deliberate mistake! It was installed in 1998!

Thanks, when the burner is on, water heat is good. we live in a area which has no limescale problems. it seems to me that there is some sensor somewhare which is shutting the main burner off?