Search results

My toilet handle snapped so put a new one on but its very loose.the nut is tight but the square bar moves inside the plastic tube that connects it to the handle, how can i fix this?

I had the Baxi Duotec 40HE fitted last year and its an excellent boiler. Very hot water and perfect for a very decent shower. Heats the house very quickly and has been a lot cheaper to run than our old Sime Friendly which was no where near as powerful. The 40 HE gives out 16L per min though. Id...

Ive had the Baxi Duotec 40 for just under a year now and its been an excellent buy. It was 1300 quid fitted, gives loads of hot water and has been cheaper to run than my old Sime Friendly which was around half the kw. It can be a bit loud on start up but soon settles down.

Try ringing Franke customer services, they should be able to help. Do you have the model number of the tap from the box it came in? Franke Sissons Carrwood Road Chesterfield, Derbyshire S41 9QB 01246 450 255

Checked today and they cant do a 600 wide sink

If you cant find one your after they can probably press one to a size you require.The high polished ones look good, proper mirror finish.

Id reccommend the Franke stuff, i work for them!! The sinks are a decent quality, they come in left/right drainers, single or double tap holes, double sinks, alomost anything you want. Just give them a call. http://www.franke.com/kitchensystems/uk/en/home/products/bymodelrange/sinks.html...

Ive just had the Baxi Duo-Tec 40 supplied and fitted for £1350. It was a straight swap for my old combi and it it loads better. Proper hot water within 20 seconds, the shower now blasts to the other side of the bath like a power shower and the rads are now untouchable when its on full. I was...

Thanks for the heads up, we wanted a combi that could give decent hot water.

Have you had any problems with the Baxi? Im having one fitted next week, the duo-tec 40.Are they good for hot water supply?

Unfortuatly where the boiler is, there is no easy way to get to any drain. The boiler will be on the side of the house and the drains front and back are on the boundrys with next door, both ways the pipe will have to pass a door with a step outside it, covering a distance of around 8m.

Im looking at having a new combi fitted, possibly a Baxi Duo-tec 40, in place of my Sime Friendly. The one problem I can see is that the new combi is condensing and I dont have a drain close for it to drain into. I could possibly drain it into the front garden as a soakaway but is it allowed to...

There will be 2 adults and 2 kids in the house.The rooms now are just too small and its cheaper to extend than move. We like the neighbors and area too so would rather stay where we are. Will still have one bathroom and maybe a shower room, only one will be used at a time i would have thought...

Im looking at replacing my old Sime Friendly boiler with a Worcester bosch greenstar 37cdi in the next month or so. Would this be a decent boiler to change too as ive had nothing but problems with the Sime? I have a 3bed semi right now but were looking to extending it to 4/5 bed in the next year...

The boiler is downstairs and the pump is on 3 upstairs in the airing cupboard. We took off one rad to see if it was blocked or not and it flowed out fine. Hot water came out one of the pipes when disconnected but when hooked back up the rad still didnt get hot. The water was pretty clean that...

Check under the bath for the water pipe to the electric shower. If there is an isolation valve on it, try turning it a touch to slow the flow of water to the shower and it should heat it up a touch more.Most people would have had one fitted when the shower was installed. On my combi boiler...

Ive got a problem in an old Victorian house with some rads not heating up. Im not sure on the model of the boiler but might be able to find out. There are 10 big rads in the house and most have the pipes running from ceiling to floor and back again, with very high ceilings. The upstairs was...

I had a probelm on my Sime Friendly boiler the other night which ive sorted but while the outer case was off i noticed that the overheat thermostat thats connected to a copper pipe was very loose. If you touch the cabling going to it, it moves in the small housing thats soldered to the copper...

The dog might be micro chipped, it would just need to be scanned by a vet and it will show the owners details.

Looks like someone else on here is doing a similar thing to what i want so i will keep an eye on that thread. Heres a pic of what i have now if it helps.