Search results

  1. O

    Bosch Classixx Dishwasher

    Can anyone tell me please whether the above dishwasher is likely to be hot or cold feed? Thanks in advance.
  2. O

    Awkward radiator size

    It seems they don't.
  3. O

    Awkward radiator size

    Many thanks seco - do you know which builders/plumbers merchants might stock a 1500, as all I can get are 1400s or 1600s...... :(
  4. O

    Awkward radiator size

    Hi, am trying to replace an old rad, without having to alter the existing pipework. The dimensions of the old double rad are 1540mm wide, by 420mm high (although the height is not critical). These measurements are of the body of the rad, excluding the connections at either end. Does...
  5. O

    Patch old wall, behind radiator

    Are you kidding?
  6. O

    Patch old wall, behind radiator

    No, why?
  7. O

    Patch old wall, behind radiator

    Hi - thanks for your reply - it's on an external cavity wall, below a window - the brickwork itself is disintegrating...
  8. O

    Patch old wall, behind radiator

    I have a radiator falling off the wall, because the house is 1900s, and the wall where one of the brackets was attached is disintegrating. I plan to shut off the rad, remove it, and patch the wall with a strong mix mortar (2 to 1, maybe?) Do I need any bonding or finish, bearing in mind that...
  9. O

    2-way motorised valve

    I'd appreciate it if someone could offer me some advice here, please, as this dripping overflow is driving me nuts, especially at night...
  10. O

    2-way motorised valve

    Am assuming that there is no air trapped in my pump, as my rads work perfectly?
  11. O

    2-way motorised valve

    Hi, yes, it definitely runs into the F&E tank, not the main cold feed tank. It is a 4' length of white plastic, coming from a black plastic connection at the top of the Hot Water Cylinder - although I was expecting it to be 22mm copper. I had already replaced the ball-valve on the F&E tank...
  12. O

    2-way motorised valve

    I'd appreciate it if someone could offer me some advice here, please, as this dripping overflow is driving me nuts, especially at night...
  13. O

    2-way motorised valve

    Possibly as a result of something I've done whilst doing this valve change, the vent pipe coming from the top of my Hot Water Cylinder now trickles into my F&E tank, causing it to trickle from the overflow pipe.... Any advice, please? OJ.
  14. O

    2-way motorised valve

    Apologies - I forgot to say that I got all the rads bled in the end, but then this problem started. Where else might I have air?
  15. O

    2-way motorised valve

    Possibly as a result of something I've done whilst doing this valve change, the vent pipe coming from the top of my Hot Water Cylinder now trickles into my F&E tank, causing it to trickle from the overflow pipe.... Any advice, please? OJ.
  16. O

    2-way motorised valve

    Ok, many thanks guys....
  17. O

    2-way motorised valve

    Sorry, do I understand you correctly - the amount of air in the CH system is preventing the HW side from working correctly? I thought the HW could work independently of the CH system?
  18. O

    2-way motorised valve

    The 2-way valve on my HW developed an intermittent fault, which was tripping the RCD on my consumer unit, so I was advised to replace the 2-way valve. I drained down the CH system, removed the old valve, fitted the new one, and released the ballcock to fill the CH system again. I've not been...
  19. O

    Glow Worm Hideaway 90 tripping RCD

    Until such times as I get someone to look at this - I presume it is ok to use the Immersion in order to get hot water.....?
  20. O

    Glow Worm Hideaway 90 tripping RCD

    Until such times as I get someone to look at this - I presume it is ok to use the Immersion in order to get hot water.....?
Back
Top