Search results

Cheers, will have a look at NEF but most I have looked at Bosch / Samsung don't have that feature, even a £600 bosch https://portal.bsh-partner.com/TCcustomBSH/controller/download_file?PDFOBID=ymrnjxecdcso0pdmdb---aI6&UMOBID=ymrnjwbcdcso0pdmdb---aI6

Hi, Can you get an integrated oven with a delay start on??. What i mean by that is you set the start time to 4pm on the oven and at 4pm the oven starts up and cooks the food. I have been looking to no avail and its also hard as the specs just say "programmable" and I then have to find the...

Can it be done?? All the stacking kits say Tumble Dryer on top of Washer Dryer, I would like to do it the other way round to enable the waste from Washing machine to fall correctly. Thanks

Got the upstairs drawings: Not sure if it helps but the bathroom wall is 220cm away from the side of the house, the dinining room / kitchen wall is 280cm away from the side of the house so they are not on top of each other: Upstairs by SkipFeeney posted 11 Feb 2016 at 8:37 PM

Hi All, I have manged to get the plans of my 1950's semi detached. Can anyone tell me if they think the kitchen wall between the dining room is a load bearing wall - the one on the far left? It is offset to the main hallway wall. WP_20160211_18_56_17_Rich by SkipFeeney posted 11 Feb 2016 at...

Plans

Hi All, Just in the process of re-designing my kitchen. We were going to have a Washing Machine and a Separate dryer, but looking at costs its not much more to get two Washer/Dryers. Is that a bad idea? We have 2 kids under 3 so do a lot of washing, also a separate dryer will need venting so...

Hi, I have been using the Dulux Trade Satinwood (Water Based) to paint my hallway until I ran out of paint. I then wrongly bought the Oil based Dulux Trade Satinwood to finish the rest of it (2/3 rds) and my other half has used it! I am a bit concerned about the yellowing of it? Is it worth...

So it is possible? But I will need to keep the cable runs short to watch the voltage drop, dig a trench for the cable, use a different transformer and some better bulbs

Thanks for your help - I will explain more... I have got 6 240v outdoor lights I bought in a sale a while ago. Looking at the garden and where the CU is its going to be very difficult to wire up some armoured cable and also dig out a suitable size trench for the cable. I also don't want to...

Hi All, A long story but is it possible to use an outdoor 240v light fitting with 12v? Eg buy one of these transformers: (its for indoor use) http://www.maplin.co.uk/p/60w-low-voltage-lighting-transformer-nl50e and buy one of the these bulbs...

No standby light i'm afraid but I have had another look at the connectors. It looks like the extension connector is slightly bigger then the power supply connector, I think that is probably the problem (thanks for the suggestion). I wonder if the extension is 2.5mm and the power is 2.1mm and I...

Ends

Hi All, I have a 12v (30a) TV that I am attempting to install in the bathroom. The power supply I recieved with the TV did not have a long enough cable to drop down the wall from the loft so I bought an extension cable (2.1mm Socket to DC Power Extension Lead 3m). I then put the extension...

Hi All, I have a couple of double glazing units that have started to mist up. I want to replace the glass. Where is the best place to buy made to measure glass? It seems a lot of places will only supply and fit, others seem to just act as a middleman for the glass manufactureres? I am...

Hi All, I am fitting a mixer tap, it comes with two filter washers. Do i need to fit these?(our supply is a condensing combi) I can't see where they will fit other then in the 3/4 nut connecting to the tap but there is already a washer in there (flexible tap connector) Thanks