Search results

just put down new decking do i need to stain or oil it to make it last. thanks

shower working perfect. but will not shut off . you need to pull the cord switch then it shuts down . have changed pcb board and still same. any ideas? thanks

i was told this model is a lot better than latter ones Ariston microGENUS II Type C is this wrong?

its only £100 to me, dad bought it then moved still as 2 year garauntee. do not know what 24 k of radfs means :?:

anyone know of another brand that will fit cannot seemed to find a hager 20 amp and i need 2 . thanks

got a chance of ariston genus 11 24 combi. do not have a bath only electric shower was wondering what size house it will work in ie how many rads it will run have 11 but not doubles thanks

i have a 9.5kw with a 10mm feed it runs about 25 feet from consumer unit. i want to move the shower another 15 feet . do i have to run a complete new cable or can i run it from the old pole switch and have 2 pole switches on the line thanks

have took filter out and they are ok. when i crack the valve nut at the back of the shower works great. then i turn off ,tighten it up and it will not run hot at all and pump does not kick in.

no ,but if i open the hot water tap it works.

first thanks for taking time to reply. the hot water feed goes from cylinder cupboard up into loft then down into shower. the hot water pipe does not go higher than the cold storage tank it is 22mm.

i have fittted a shower pump ( on gravity system) if i open the shower a bristan thermostatic controlled no hot water comes out nor does the pump kick in.if i crack the nut at the back the shower control,pump kicks in and hot water comes out of the shower. as soon as i shut off shower...

it does , thanks a lot

a big thanks

so the pipe from the small tank which i always thought was just a cold feed for the central heating system is also an expansion pipe.

sorry jumping the gun. the existing flow and returns are 22mm sorry do not have a camera

the feed (15mm) goes on the return the expansion ( 22mm) on the flow before the pump. an i right? or can they both go on the return?

the boiler is a gloworm hideaway 80. the existing vent pipe is 15mm would it be wise to change that now? thanks again for your help. the cylinder is in a room without a radiator that is another reason i want to use existing pipework on lower floor. so it would only be a matter of running...

would the cold feed and vent have to be before the pump and would it be ok to use plastic barrier pipe

if i bring the the cold feed down and the vent pipe to the boiler could i then put my zone valves near the boiler? they are both in 15mm with it been a longer run should i increase the pipe size? if it is a lot of pipe work it would be worth it in the long run would it . ( as all modern...

first thanks for taking time to reply so it is not possible to have the zone valves on the ground floor? i was hoping to use the existing flow and return ( the old hot water gravity) and connect them to the heating flow and return on the ground floor. so there is a lot of pipe wor involved?