Search results

Assuming your talking about standard door contacts. Then there is no power, so you just extend the cables with alarm cable and junction box's. The keypad being powered, you can either wire it live or take out the keypad fuse, rewire and put it back in, as long as there is no shorts the...

honestly some post on here

ADE optima compact would appear to be what you have, unless someones put something else in the box, which I would have thought is unlikely.

All the Elite range, Premier 48 V8.14 (note previous versions can be flash upgraded) and above, some of the international panels but would have to check the version numbers. The old premier 24 which finished at version 8.33, can utilise a com-ip module with wintex, or or using the online...

Your mind and its placing is beyond words prison shower....lol. The Police may have consulated but if your neighbour says you mentioned at the time and everyone was happy. Just because it wasn't in black and white doesn't mean it wasn't mutually agreed and it saved them getting there own...

The com-ip module has an email facility (lantronix sub menu) but no one you ask seems to know how to get it working. if sending signals out via ip, you need something that can read the message. Montex, texbase free to engineers can be downloaded free, but you need a pc (receiver) on all...

@Sally sounds about right, you could have evidence on a rapist but they would get let off on some stupid technicality. would have thought the get out, was you agreed with the other garden owner it was okay, I am guessing the owner would want the guy convicted?

sounds like the line quality isn't very good. Checking with a normal phone connection should confirm as previously suggested. You can change the modem level, in global options(3), system options (2), modem level(7) or scroll down to modem level, press No then 01 - 07 to change the values...

have you tried to manually secure the devices tamper, ie hold it in. and check the status of the device when you do? could be device failure if it doesnt secure manually, you can try down powering the hole system and powering up again to see if it clears. Note don't do yale alarms but...

Texecom are due to release a wireless bell soon apparently. If you don't like the look of the kit don't have it as it will niggle at you every day you see it. But it does mean somewhere along the lines you will have to compromise. I avoid completely wireless unless the customer insists...

I would disconnect the zone wires and join them together at the detector end. If its false alarming then, assuming the zone is programmed up, its a wiring fault or the keypad zone itself, which is unusual but has been heard of. Easiest way to confirm that link out the zone at the keypad...

Texecom Premier 48 Ricochet Kit CAB-0063 comes with metal 48 and a seperate 32 way wireless expander and some devices and a keypad. Prices do vary. What break beam devices are you thinking of adding. I would opt for the 48 so you could have the warning devices on a separate area...

In your event log what are the sequence of events. As this has started recently, something has changed recently, ie the detector or wiring most likely. Since you have the door and the smoke run to the keypad zones, opening the door triggering the fire, would suggest cabling possibly. Do...

the advice on here is you get what you pay for to some degree. you can always try it and send it back if it doesnt do what you want, nothing lost. However I don't suspect you will get a quality image.

The led only lights up in walk test mode and as bernardgreen suggests its a battery saving. Wireless is grade 2 but hardwired Grade 3 systems you have to move the jumper across to to disable the LED as part of the regs (i believe), but people like to see the detectors working. If...

Okay if I understand this correctly. you want a conventional pir but rather than wire it back to the panel you want it to communicate wirelessly back to the panel and you don't currently have any alarm system. conventional pir needs a 12V power source, it would probably be more expensive...

If you go to setup users you can turn off the code lock on entry off so you can disarm the system on entry. (per user) You can also turn this off in system outputs, custom outputs 2, 5 full armed entry. The panel at default is set so on entry you must use a prox tag, unless you turn these...

The veritas used to come with a spare set of fuses and at one time where banded to make it easy to quickly id. "looking at fuses " as pointed out should be done with multi meter as its not always possible to see damage that easily just by looking. Make sure at least one end of the fuse is...

Premier External TD is designed for external use, it has two sensors which would require activating to get an alarm signal. It is unlikely that a cat would activate this detector, but would be dependent to some degree on positioning, the mounting height is 1.0 to 1.4m. Not cheap from...

Given you want a communicator may be cheaper to opt for the Texecom 24 Kit http://www.cts-direct.net/texecom-premier-24-metal-kit-grade-3-prox-keypad-com2400-caa-0056-texecom&currency=GBP?gclid=CMHVyOWo3rwCFUoOwwodTEwACA