Search results

Hi, got this extractor fan installed in bathroom. It’s about 3 years old. The 3rd we’ve had since we brought it as every one develops this fault. It has a humidistat which kicks in and operates as normal. But after a few mins it kind of grinds to a halt and then it sounds like it’s struggling to...

Hi, does this mean having a sensor on the front door? can he not just change to timed exit of say 30seconds?

yes it has worked but only if zone 1 ( exit/entry) is not open/active when alarm is set. zone 1 is entry/exit. man is coming over this week to change the mode from entry to timed...

Its over a year old. Everything is hardwired. made sure of this. Not keen on wireless security devices.

Hi, I already had an external gsm dialler so just wanted a way to get notifications via internet of alarm state and control and comip fitted the bill.

ok will wait for the man to come back. no messing apart frm setting up the keypad app to use comip. like i said, it happens occassionally and i think thats the issue with the pir detection.

thanks for the relies. yes was installed professionally. i have access to Wintex as i was given the eng/udp code when we setup comip and had to config the details. No door contact, only pir on exit.

Professionally installed. The installer is away for 3 weeks so thought I’d ask on here to save me waiting...

Hi, I have a Texecom Premier Elite, normal setup with no contact sensors or fobs, just PIRs. So when i activate the alarm and get the message 'Area in exit A', sometimes it stays on this and the tone never stops so assume the alarm never sets. What i think it could be is that when i walk to the...

Thanks John. Understand you now.

Thanks for the response. I’d rather keep the old handles as they are all matching. So would I need to open up the existing lock and replace with the tubular bolt and then would the release knob fit on top where the existing lock hole is?

Hi, I have this lock on the bathroom door but want to change it to a thumb lock (is that what you call it) where there is no actual key, just a turning knob. I don’t suppose there is a way to change it without changing the handle?

Hi, it’s better but still not air right. I guess I will have to remove the panel as you stated previously. I was hoping to avoid that! Thanks for your help. Learned a lot more about these doors.

The latch part is already tight.

Hi mate is this what you mean to tighten up? I’m far from an expert !

Hi hope these pictures help

Is there no adjustments I can make to the metal fixing on the inside of frame where the locks latch into?

Thanks mate, looks like a job I’ll try this weekend. Appreciate your help. Thanks.

Hi mate sorry hope this explains a bit better The rest of the door is ok just the part highlighted in red can feel a draft and slide a thin card between the door and seal.

Hi so adjusted the hinges and the gap is closed now all but the top horizontal part above the door handle. I don’t think the opening side can be brought in anymore. It is just this part, the rest of the seals are flush against the door. Even with the handle up, there is a gap like 1mm enough to...