Search results

Here's the output I think it's the right setting without button pressed. When it's pressed the reading goes up and down so didn't take a pic of that. Unless I have the setting wrong on multi meter?

Ok mate will do this tomorrow

Yes that works thanks! The second chime does a full ding dong but the original does less of a ding dong. So does this mean I need a more powerful transformer?

Ah ok will try that shortly...

Here's the original So it's connected to the same terminals as the White wires are which are connected to the door bell button.

I've tried 0 and 3 initially so that activates the original ding and half dings the new one. This is without a button push. And the ding stays on the original and doesn't dong until it's disconnected.

I've bought a byron 765 from Argos attached is the instruction. How can I wire this one up? Given up on the other ! The and.

Here is a pic. It's the same reading on both chimes. When the button is pressed down, the reading drops to 0 and then back up to 15 when button is released.

Ok I'll try and borrow a ding dong bell next few days and try that. Hopefully like you say the transformer in my current one will work them both.

Thanks will try that tomorrow. So is the only way to get this second chime to work by holding in the door bell button?

I just pressed the button as normal only the original chime sounded. I have a volt meter I'll get it out tomorrow and give it another bash. I'll measure both voltages

Hi, I've connected as instructed but still the original bell Chimes and not the new one. Any advice appreciated.

ok i'll try that tomorrow and update you on here mate.

Ah ok, so bridge the right 2 terminals on the new and then connect the 1st 2 terminals to the original chime terminals?

connected the 2 terminals on my current door bell to the 2 right hand terminals. when i pressed, the current doorbell worked but not the new one.

Blyss dc2-uk-wh

Here are the pictures...

I borrowed my friends chime (no mechanical ding dong) and that doesnt work so will try a ding dong like the one i have already.

can this thread be moved to the 'Floors, Stairs and Lofts' section?

ok thanks, what i may do is borrow my dads chime and see if that works as a 2nd chime on mine. then i will know if i need a new transformer as well as a new chime.