Search results

can anybody explain why the wiring drawings for the 2 ballasts are slightly different however, i wired the white tridonic by just changing the wires from the luxline over (like a 1 to 1 method) and everything still worked fine. Its an EM light also but that works fine anyways. cheers...

hi all, have 5 above fittings on 1 circuit that tripped. After checking them out, found a busted ballast. Replaced the ballast however its still not working :( also changed the lamp with a known working one but still nothing. Photos show old and new and as you can see the new one has an extra...

hey chaps, have the above heater on a site i work at. The element is buggered and needs replacing. However, i have tried so f'ing hard today to try remove it and it wont budge (have even tried shouting, banging and stamping my feet to LOL) anyways, im feeling the only option left is to try...

hey chaps, if anybody is interested I finally got to speak to a helpful chap at Atlas Copco today basically, top symbol (rectangle with arrow pointing to top right) is for Remote Start. But you have to physically push or start the remote switch where ever it may be Bottom symbol...

found a picture of what it looks like but it aint the best cheers

nobody available to help as all engineers were busy. Left number and was told somebody will call back.

hey mate thanks for replying the symbols are seperate, they are not together its just the way i have drawn it (badly) LOL And its which 1 of these symbols i need to select for the auto mode it is a diesel engine and its a big bit of gear.

hey chaps, got a generator on a site that if mains power cuts out then the genny cuts in and supplies. Anyways anybody know what the 2 symbols are coloured RED in the picture?? Uploaded with ImageShack.us The I is manual startup, the O is manual stop. I need to know which is auto...

look like possible only option :( didnt really wanna be messing about splitting tails though

hey thanks very much for that, it is very expensive :( checking through internet an some others have mentioned PROTEUS?? Does anybody know if this is true? Yeah mate RCD already there

I have a Wylex NN Consumer unit and need a 45A MCB for a 9.9kW shower. Wylex MCBs only seen to go to 40A, so is there an alternative brand that will fit? cheers

Generally quite new to commercial setups and these fittings. Circuit protected by square d c10 mcb So would it need this in line fuse you think? Cheers

hello again :D purchased a new fitting today (switch start to save money :( ) anyways, old fitting had an 4A inline fuse fitted, new fitting has nothing you can just wire straight in? any help greatly appreciated again LOL cheers

ok guys thanks for the advice :D so just checking, if i replace fitting for a new HF, im assuming if i generally stay with the same 58Watts i dont have to work out any difference in loading on the circuit or anything?? Should techincally be a straight swap yeah

ok nice one :D so is switch start what i have now???? and would it be replaced with this http://www.screwfix.com/search.do;jsessionid=PX54N3DZXDJJUCSTHZOCFFY?_dyncharset=UTF-8&fh_search=52968 or for the extra money is this better as its HF...

so it is quite a hassle then LOL would you need to rewire the internals because you would no longer need need the starters is that right?

chaps, got an old 5ft fluro fitting today that was not working. In line fuse had blown so replaced it and then the ballast decided to give up and ooze black tar crap everywhere. Im quite new to this commercial aspect of stuff inclusing these older fittings. Looking through internet i think...

never mind :D cheers

anybody have an idiots guide to testing them correctly?? cheers

hey, yeah it is an office block so sorry didnt mention that earlier :D not really sure if there is any other supplies locally i could feed off.