Search results

  1. O

    partial block w/m stand pipe

    thanks breezer I couldn t find any caustic soda :( so bought some foaming drain cleaner It didn t work :cry: Now trying brute force approach * rammed 15mm copper pipe into blocked pipe* The blockage looks like matted, harden paper/cloth Mache throughtout length of blocked...
  2. O

    partial block w/m stand pipe

    The water from w/m hose overflows from stand pipe :( flooding floor . The pipe leading to the drain appears to be partially blocked ( will drain some water poured into ). :?: What can be used to unblock it totally without dismantling it ? Things suggested so far : Bleach...
  3. O

    iiyama vision pro

    It was borrowed camcorder showing flickering, but no lines as such. The picture was clear without flicker at 100hz only if that means anything ? Only used a cam once before to record bios setting, but had to take stills to enable the information to be read. thanks for everyones input.
  4. O

    iiyama vision pro

    Have used all adjustments top 25mm of screen tapers out by 2mm Will leave it as it is now :cry: Thanks
  5. O

    iiyama vision pro

    yes to keep a record of original settings of the OSD before changes How would I know would i know how to match it and would the cam pick up flicker at above 100hz ? tapering out into corners A good replacement for this monitor would be ...
  6. O

    iiyama vision pro

    hello what tests can i run to see if this monitor is now fautly ? When recording default setting of osd with a camcorder I noticed flicker on cam lcd at every refresh rate except 100hz( 60-144hz tetsed). Do the psu on these monitors go first ot crt ? No noticeable defects apparent...
  7. O

    US Porter Cable 7518

    Does this apply to cordles drills too ? Also does importing cordless drills work out cheaper ?
  8. O

    who makes b & q pro

    You are lucky /good branch. It wasn't me, I was quoting part of a conversation between me a tradesperson and a B & q employee. I have since bought some Worx power tools with 3yr warranty from homebase. Worx was recommended by manager at homebase : " ... the longer the warranty the more...
  9. O

    hoover washer dryer hw160m wet clothes

    sorry to hear its still not fixed , did they charge you again ?
  10. O

    Central heating control

    no offence taken kevplumb but does that apply to prices on internet ?
  11. O

    checkvalves ... ?

    thanks everyone for information
  12. O

    Central heating control

    which ones no9 ? i see only 8 ?
  13. O

    checkvalves ... ?

    ok thanks
  14. O

    Spirovent Deaerator and dirt separator.

    is that loads plus vat ?
  15. O

    Central heating control

    how much are these and how do you fit these ?
  16. O

    Spirovent Deaerator and dirt separator.

    how much do these cost ?
  17. O

    checkvalves ... ?

    thanks for all replys so the order of fittings for mixers taps is as follows ? service valve>>>> flow restrictor >>>>>check valve>>>>>tap ??? is that correct ? does hot and cold flow rate need to equal ? I have 9litres/min hot and nearly double that cold ?
  18. O

    Boiler filters.

    picture / linkof y strainer kev ? thanks
  19. O

    checkvalves ... ?

    and the nut in middle ? I said simpletons guide :o double check valves on both hot and cold what about flow rates ?
  20. O

    checkvalves ... ?

    hello when to use check valves on mixer taps ? flow restrictor and service valves ? does flow rate need to be equal ? ie 9 litres/min hot and cold ? simpletons guide please :wink: what is diffenece between single and double checkvalves ( what does nut do in middle ) ? thanks
View older results
Back
Top