Search results

Euro datacom front plates, Suitable for flush boxes to BS 4662: 1970 and surface boxes to BS 5733: 1995, Logic plus style, Colour matched to MK logic plus range, Accept industry standard (euro) and LJU6C snapfit modules. 86mm x 86mm x 9mm, 50mm x 50mm above description from...

Yes probe sits between the mat element, getting temp from both sides.

Has the floor sensor been installed according to instructions?. Open up stat, should be sensor cable connected to relevant connections(continuity test to see if it works approx 12k/ohms). Wouldn`t expect to see air temp used, they were for higher temp output heating(conservatory) areas...

2way,3way or multiple switching can be wired in various ways, just because there is no 3core & earth looping through an intermediate switch does not mean anything, none of you have never wired intermediates through joint boxes using 2 x twin & earths?.

Guess time, ballast faulty in 1 of the fittings.

Malcolm, any idea what make & model no. council guy used.

Looking at the pdf, it has a service tunnel(cover for incoming supplies) with removable parts for water/electric.

2 options , electrician connects as ive posted or meter guy takes out the live(load) from the meter and connects it to the henley block he attached to old storage live, then fits a new meter live from meter to the henley block. You will have to arrange which is easier, you could call meter...

Looking at your pics, the old storage boards neutral is connected to its connector block(never disconnected), meter guy disconnected and sealed old storage boards live supply into connector block, your electrician could have cut the service head seal and removed fuse (permission required) then...

Malcolm, what do you want to time that the BX2000 doesn`t?. The BX2000 will heat up the cylinder during the night, if your mum runs out of hot water she can use the boost buttons during daytime. Adding other timer`s may confuse an 89 year old, you`ll be receiving more phone calls.

Water enters bottom right on your existing shower. Mira jump http://www.aqva.co.uk/Bathrooms/69240

Both have cable and water connections on the right hand side, water bottom side , electric above. Google is your friend for pdf`s.

Did the council resolve the luke warm water issue?. The BX2000 off peak will heat immersion approx between 11.30pm and 6.30/7.30am (times vary) and maybe a couple of hours in the afternoon. The normal supply can only supply power to immersion if the 1hour or 2hour boost buttons are pressed.

Connect up as you said in previous post and afterwards ensure centre pin is live , make sure fittings lamp thread is not live .

There will be a number / size , ie 5amp .

I wonder if the circuit was altered and put on higher rated fuse/mcb, using freezer mcb . What is the freezer mcb rated size ?.

Look for a fused spur , fed from freezer circuit supplying power for light , are any other lights on same circuit.

your old fitting looks like it has 2 neutrals(blacks) and 1 switched live(red). New fitting is it a screw lamp(ES) centre pin is switched live, outer screw(lamp thread) is neutral connection. Usually easy to see which terminal is centre pin or you could do a continuity test. Earth wire (not...

If your switch is an override for the lamp only(not powering pir), when pir switches on power to lamp, it also sends power to switch wire(they are connected together somewhere ie at switch,pir or joint box).

Never seen any fire rated downlights with intumescent around lip of fittings, vapour barrier i have, look inside the fitting behind lamp holder for intumescent material.