Search results

I would contact your local trading standards office and explain your neighbours surveyors fee`s to them.

The SMC control pack consisted of a circulating pump for the heating fitted to the boiler flow, on the outlet of this pump a SMC controller was fitted by means of a 3/4" barrel nipple to it`s inlet whilst it`s outlet connected to the rediator circuit. On the top of the controller casing was a...

Google "the party wall act" to find the answers your query.

http://www.homebase.co.uk/webapp/wcs/stores/servlet/ProductDisplay?langId=110&storeId=10151&partNumber=830219] Universal washing machine and dishwasher trap.

You may have an airlock in the pipework so try turning of all the radiators that are gatting warm or hot and try the heating for about 30 minutes with just the cold radiator turned on, make sure that both valves are opened on this radiator. If this works do the same with the other radiators...

I suggest that you fit high pressure, quarter turn ceramic taps to reduce splash.

The wiring connections for the eberle rtr-e 6705 are as follows: L = 1 N = 2 N = 3 N = N N = N L is common, 2 makes when cooling and 3 makes when calling for heat. You can check cotinuity between L and 2 or L and three with a continuity meter by turning the stat up or down with the...

Don`t worry, the way it`s going all these Rogue trader programmes etc will be drowned out by the stupid unnecessary back ground music getting louder and louder. Then no one will watch it. :D :D

What you read is correct, tell the BG engineer that and he will think that you know more than him :wink: :wink:

Try undoing the screws completelyand removing them, This timer is still available or direct replacements using the same backplate are the, Hortsmann Tiara 425, or the, Channelplus H21XL.

It is possible that there is air in the gas pipework, which needs purging, if you have a gas cooker with automatic ignition, try turning on one of the top oven rings and see if it ignites. If it does, have several attempts to light the pilot on the boiler. If still no luck get expert help.

22mm copper is outside diameter where as 1" iron pipe is inside diameter.

What is the make and model No of the boiler?.

It could also be due to the mains water pressure pipe work in the attic, connecting to the ball valve, not fixed or clipped sufficiently. Try steadying this pipe while the noise is present to prove a point.

Your findings indicate that the oil pump solenoid has failed and is not letting oil through.

Go to www.nextag.com, select, seach and then type, dwv toilet

You say the pump was spinning and now you say the pump is dead :roll: :roll: :?: . Tip, get yourself a grunfoss. :wink: :wink:

Agreed. It would be interesting to find out what was exactly the cause of the pump failure, hello Kelvin.

But highly unlikely with a NEW pump having no airlocks or blockages. :wink: :wink:

Kelvin wrote Yes I can hear the flow switch click & yes the pump is spinning checked via centre nut, the oil boiler is 11 years old, there was some colouring in the CH water but no slug in the water, prior to changing the pump, the system performed very good, we only needed to set the dials at...