Search results

Would you care to elaborate a little further Wilhem?

Can anybody tell me the difference between the Grant euroflame and the Grant multipass" boiler house boilers" apart from the BTU range. Secondly is there any pros/cons between them? Thanks all

Playing catch up on the forum reading here, just wondering how you got on Ken. There was a lot of speak about spoiling your worktop but assuming you hired a 1850w router ( you really need that for this job).Great care must be taken in using this beast i.e. feed the router in the correct...

Could it be your catalytic convertor rotten eggs smell?

Anyone point me in the direction of any www's that would assist in kit construction for a proposed extension. i.e. making the kit from scratch etc.

Just wondering what firewall people use and is there one that stands out above the rest. Using Aol which has a bulit in firewall not sure how effective it is as no warnings are ever given of attacks. Using a dial up connection at the moment but have the possibility of broadband at the end...

Black smoke suggests it could be lack of air, it may be worthwhile fitting a new air filter.

here is a site for you.

Installed a solid fuel heating /domestic hot water system in my sisters short ago, 4 rads upstairs, 3 rads downstairs and a new dhw cylinder upstairs. 6 of the rads were fed of a pumped circuit all controlled by trv’s the remaining rad was gravity fed from the primary heating coil circuit...

I have a deep socket, inside the socket is filled with 2mmdia spring loaded rods, when pushed over nuts,wing nuts,worn nuts etc the rods retract or stay in posistion and form the shape of that particular part you are trying to unscrew Should work perfect in your situation with a 12" extension...

So you say no more then 13amps, from a double socket, how many households will you go in and see the kettle beside the toaster, quick sum says I'm drawing 17.5 amps at breakfast time. This is just an observation I am not disagreeing with your quote of the regs. :lol:

Another advantage of digital is if you happen to reverse the polarity of the test leads the meter will measure a negative,with analogue you may end up driving the needle against a stop and causing damage.

Managed the job in an evening, putting bearings in no prob, removal was easy enough too but I suppose at this point I should say I am a marine engineer and had access to a set of bearing pullers.

If it is the bearings, £9.47 fixed mine!!

Not sure what system you are considering, personally I have a Ipaq 2210 running tomtom2 software with a bluetooth GPS reciever, to plan a route all i have to do is type in the city, street and street No and the Ipaq does the rest. No planning on the PC neccessary, you can also add 20...

a tree

Think you meam Garmin...try here

Interesting topic, Wossie6 you know your stuff , can you help me. Bought a cream leather suite and I am using the stores leather cleaner but it does not penetrate into the grain very well, therefore after cleaning it still looks "dirty" do you have a secret recipe. By the way, the store...

Just been watching a barn conversion on discovery channel, they were laying tiles on a chip -board floor and they used a flexible adhesive allowed the floor to move without disturbing the tiles and grout

Sorry, just looked at the BES catalogue the stat I used was 6 (2) amp, lesser rated than your one. I wonder if the 6 is peak and the 2 contiuous rating? Anyone know? Hope you don't have to replace an immersion in the near future, big problems if access is so limited. Installation...