Search results

The B&Q man is right no reason why you can not paint over silk as long as you key it well.Your problem is the paint the vinyl matt is not durable.Diamond matt or endurance (same thing but retail version) will be your best option

I know I can use one of these to replace a 1 way switch but will it work with 2 way switching as I have found the type I need at a good price on Ebay.thanks

I know its an old post but for reference Should be taped and then skimmed with a joint filler really to prevent cracking in the future

Most likely a hole that has been covered with scrim tape and then plastered over

Nope but was looking in to these will they work

Side opener and is about 46 inches high.The top and bottem 6 inches are sealed fine just the middle lets the a draught and noise through

One of the sashes on my windows lets through some wind noise on the hinge side,after further investigation it looks like either the frame or sash has bowed a touch.Any tips how I could get this to reseal as the windows are in good condition and are about 15 years old

The big new builds we work on have plastic under floor heating throughout and were talking at 6-8000 square ft,always works and they don't seem to get any problems with it and some of there houses are now coming up to 20 years old..The way they install is 6t inches of celotex in 2 layers, then...

Its not very dusty but the sun tends to heat it up and when I tried a normal PIR it triggered the pir after a few days so disabled it.Will a shock sensor deal with 3 panes of glass next to each other aprox 45cms square

Is there specificate type of PIR that will be reliable for a smallish shed/workshop,I have contacts on the doors but wondered If I should have PIR as well in case the window is broken and gain access even though its quite small.I don't want false alarms due to heat ect.Are the microwave PIR's...

I think its steel coming out of the meter ,hes just disconnected the old gas pipe at the same place where the join was and ran another new 22mm

If it was my house I would off phoned the install company and tell them to install it properly.I know they use sub contractors on a crap price but you would think they would do a neat install

Nope that's ok 22mm off the steel supply from meter but along the hall wall at high level not some thing ~I would have in my house

Question is would any of you heating engineers do it this way.When the surveyor came he said it will be connected under the floor but as this bloke was in such a hurry hes done it the simplist way.Also you cant open the front flap to the boiler fully as hes installed the boiler off center in a...

baxi back boiler in the lounge

No it was done under the free boiler grant scheme they have fitted the combi in the kitchen and ran a 22mm flow return to the kitchen rad aprox 1.5 meters away which is 15mm droped down pipes from above

I said I would ask here ,Is it good practice to tap in to the 15mm pipework feeding a radiator for the main heating flow and return on a combi boiler.This has been done by a heating firm installing a new combi.It seems to work OK

Thanks I done that wondered why it did not work so pressed chime on keypad and now works

Can any one tell me how to program a chime when the entry exit door is opened when the alarm is not armed on a texecom 24 premier Thanks

Any negative reason why I cant do away with the door contact as I don't really want to screw them to a new door/frame and fit a pir in the small hallway and use as the entry exit