Search results

Hm ... would never have thought about this but this would do great! One more time thanks, Boyo!:)

They're Robus Fixed Round Mains Voltage Fire Rated Downlight White 240V http://www.screwfix.com/p/robus-fixed-round-mains-voltage-fire-rated-downlight-white-240v-pk10/44456

But can I just not leave it hanging in a terminator that will be accessible?

Unfortunately no; it bare has enough space for the two connectors used for L/N

What's the best way to terminate the CPC? Yes they do claim the box needs to have a strap around it to be maintenance free but I assumed it would also need to be fixed. Sounds like I'll just strap a cable tie around it and not fix it then :)

Thanks again boyo. So it's two core flex what I need to get; I am running the earth wire between the connectors just in case I need to change them, but wasn't sure on the best way to get down to the fixture from there. I did make the junction almost maintenance free (wage box and connectors)...

What type of cable to connect from the double insulated recessed light to the cable connectors? Right, so I've removed our pendant and due to the new fixtures light distribution, I also need to add some recessed lights (fire proofed if that makes a difference). The recessed lights have a...

So it's TN-C-S? In any case, this wire would not be live then and should definitely be connected with the rest of the earth. Right?

I tested the earth cable using the conductivity setting on a mm and it seems to be connected to the neutral wire. Any idea what this could be?

Same switch - there is only one switch controlling one light fixture. So the JB were a bad idea an I can prolly do without. If I plan to add two more lights controlled from the same switch, is there some good reading on how best to wire it with choc blocks (do I just feed off all the extra...

Thanks to both of you for the earth tip and especially thank you Boyo for your detailed answer. I assumed that a junction box would be the better option but I take it that the doohickeys are the way to do it properly? The floor board above is cut out but they would have a carpet over very soon...

Hi! First post here so please be gentle :) We got a new house, refurbished it and now the missus wants hanging pendant lights in the dining area. Luckily the carpet fitting has been delayed due to technical issues so I thought it would be an easy job just replace the current ceiling light with...