Search results

Hi on reconnecting battery & with no power siren came on in bell box put mains back on & couldn't reset anything so had to disconnect battery,power down & wait for it to go off. In my manual it mentions putting a link in the G3 mini to reset the panel.

Hi pars tried that & alarm still going off

hi I have a ade accenta + remote keypad with a G3 box in the loft it all started with powering down fuse board to fit new outside light & the alarm went off & had to enter factory reset code to turn off. Anyway came in from work tonight & had a bright idea to try & put my usual code in which I...

hi was just wondering what type of glue I should use to stick a vapour barrier to a worktop under the dishwasher?

Hi kirkgas iam due to do my acs reassesment and wondered if you had a mock paper as iam reading the books but dont feel confident as nothing is sinking in ,i would really appreciate it if you could email me [email protected]

Hi iam building a concrete shed base for a concrete shed which will be assembled on site when my base is ready but iam not sure how much crush and run i will need for a base of 11 feet x 12 feet at a depth of 5 inches any help would be appreciated

Hi is there any chance you could give me a bell tomorrow just to give us a bit of advice obviously it would be in the upmost confidence,my name is Paul and my number is 07817957085 cheers m8.

Have had a problem with one of these going off on F05 previous engineer has fitted a pump and it went off i got the job and noticed the system pressure was low and the vessel had lost its charge so repressurised vessel and refilled system,it had been converted to a sealed system.I also checked...

Hi Kirk any chance of sending me that powerpoint to [email protected] many thanks

Wotan thanks a million i really appreciate your help :D

i have a k reg ford escort 1300l and the problem is lately the fan belt has been squealing so i changed it but after a while it started again then the next thing to go wrong the battery light came on then this caused a fuse to blow which affects the brightness of the main headlights it has also...

thanks guys for your help i have taken your advice and in future i will know what to do many thanks :D

hi thanks for your replies it wasnt a wind up i ran out of materials which i couldnt get delivered untill the saturday the local builders yard worked out what i needed but were out with their calculations is their anyway out of this :oops:

hi iam pouring a concrete shed base and have poured the area of the base but i have 1" in height to finish off is this ok to do this iam going to keep it wet and finish it off on saturday? :?:

have you noticed any leaks outside your house from the blow off discharge pipe.

you should always check if they are corgi registered.

i dont understand why a water circulator would be used to run radiators it main function is to heat the cylinder you would be lucky to heat a couple of k2 rads when taking p/work and cylinder into account.15000btus would be no way near enough to do this.

15,021btu,s is slightly less than an average gas fire and doesnt seem enough to run rads off it.

the janus 6 are only 4.4kw .

i do live in a soft water area,the ones i have fitted are janus 6 circulator connected to a direct cylinder i dont understand why you would run radiators when you have the warm air.