Search results

I'd guess you read it wrong, r10 102 will more likely be RIO 102. Should be a bit more to the message too, either Missing or tamper? (few other less likely messages) If its missing check your power and data connections are right, look at the RED Led on the RIO itself and seee how its...

Taken to the extreme and beyond maybe, but... 1. Switch on Jamming 'machine' 2. Break into house and activate all sensors 3. Within 30 secs of above switch off jamming machine 4. Rape house while sensors are 'sleeping' 5. Rinse and repeat for profit. Plausible, or not?

One does not get to 30000 posts without posting the same crap over and over again. Nuff said. HTH

May be the bit your after changing Brimmy, sadly for you. Maybe time to get a proper engineer in to fix your system up.

Anyone know the difference in the default 8888 installer code to the 9999 master installer code? From memory I think there's a bit which you need the master installer for but I forget which section it is.

The * key on your keyfobs or the OK button on the front of the panel will tell you what faults there are on the system. When I fit them I usually end up doing most things with the panel powered solely from the battery so I dont think that should cause a problem. have however made the mistake...

Fitted a couple of Themal Mic412's, at that price I doubt it's the kinda thing you'd be seeing on ebay. P.s. Wanna buy an Axis 223m Lee?? Fully working. :P

Couple of things spring to mind. There's a diagnostic on it that tells you the state of the input, if it's in an alarm state of a healty/normal state. Check that as you do youir 'tests' with the battery. I think by default (no manuals with me right now sorry) that input 1 defaults to call...

ComIP not compatible with Premier 24 I have in my mind?

Thanks Adrian. :) Good to know about the 640 taking more than 32, we come acropper before with the 32 limit and **** poor surveying from the boss. :wink:

Might be 2 versions out there then, never had any expanders with the Learn switch or LED's actually in place. Almost certain of it.

Im aware of the 8-xp, as I have used them, thats how I know you need either the Premier keypad or PC-com to learn sensor onto it. Does anyone else make a Wireless Dualtec apart from Honeywell? Their DT8M's and such only goto Domonial, G2 and Dimension panels.

Alarm as you source when they're releasing the update to increase the max number of Ricochet devices to higher than 32. Been told it's in testing but no one will say how long before release. There's a good un.

Downside to the Texecom stuff is you need to buy either a Texecom premier Keypad, or the Ricochet software and Pc-com in order to add the wireless devices onto the wireless receiver, on the plus side it's quality stuff and if the signal doesn't reach as far as your garage you could add another...

Been doing alarms/cctv for 16years ish. Do I have one on my own place. No, but i've got 3 cameras.....just no dvr or monitor to view them.

Can we all have a coy too please. Always looking to expand meh Premier knowledge. [email protected] Plz

If your happy enough you could get the needed few wiers around your house then I'd choose the Texecom, we've used hundreds of each and both bits of kit have always been rock solid. Powermax is lacking in the programming/flexibility stakes compared to premier, especially where it comes to having...

Are you thinking the IXP-W then Alarm? The 8 zone output unit for connecting to the Ricochet expanders? Think it's available as we were quoting for using one on a job last month. I'd recommend ditching the existing Excel and going for the Premier, you will never get above 8 zones on the...

I'm really not getting mixed up at all, Accord, Xpc, Infra and some Vista's (afaik all made by Ademco and way before DD243) all have the 'Supplementary Entry' option which does exactly what I said above, gives 30 seconds of internal sounder noise after which the external siren goes. Although...