Search results

Mikeyd Hi, I fixed the switch last night, works fine. If I wired it the way you are saying would the switch still work? There is only one ceiling rose. Which is the correct method? Coops

Hi RF Lighting The switch is thermoset plastic No metal, so no earth needed on switch plate Cheers Coops

Cheers Steve

Hi Currently I have 3 Black wires within a T Block 2 Red wires feed into L1 1 Red wire into the Com 1 Earth wired to metal box in recess. No wire in L2 (due to the 2 way switch being used as one way) -------------------------------------------------------------------------...

Cheers BS3036, Fitted 30A strip into socket space, nice and easy. Cheers Coops

Thanks Ban all Sheds What amp rating should I get for the choc-block (connnector Strip). I have some 15 amp but should I go for 30 amp to play safe. Cheers Coops

Cheers for all the comments posted, They have been very helpful. If they are anymore, then please continue to post. Thanks again to all of you. Coops

Draft question, I have a twin socket next to where I want to place a childrens bed, to stop them messing about with the socket I was planning to put a blanking plate in place of the socket with the wires connected to a terminal block to continue the ring main. The socket is fitted within...

Cheers KirkGas I will remove stat and go to the nearest plumb centre to get a replacement. I was worried that I would remove the stat and the water would start p*ssing out. Cheers for the advice Coops

Hi This is fantastic and in the light of the item on the news (Baby Rhianna's Death) I checked our thermostat on our immersion heater, even though it is only used as a back up and there is a Drayton thermostat on the outside of the tank and this is linked to the boiler in the kitchen...

Am about to, but I want to be sure that it is not something daft. The dishwater stopped working over the night and kept at 60 mins to go. Tried reset and the machine is not playing ball. Any ideas, before I get charged a fortune!!

Hi, Not long bought a Bosch Dishwasher and a few days after using it at the begining of every program the "Check Water" light keeps coming on. The manual is not fantastic and there is not mention of what to do when this light comes on. I have noticed that if I move or slighly tilt the...

Hi I have a fused connection unit that runs off a twin (ring main) socket in the kitchen. I have just brought a new dishwasher that runs at 2.5 kw and a washing machine that is already connected via the same FCU. Both sockets are about 1 metre away from each other. Before I plug in the...

Cheers John for all your help Have a good weekend

John, Does it matter which way round the busbar goes? Holes in the plastic grip (on the left) ? or holes on the right and fitted within the MCB? Cheers Coops

Sorry Have answered this question myself. The Busbar and the MCB are the only things that need changing as the Red wire is not connected to the busbar as first thought. Keep advice coming cheers all and esp. John.