Search results

System has been flushed, pump is on slow speed.pipe work was installed as per instructions

Not sure what you mean by air ingress or gassing

I have got an open vented heating system in which I have to bleed one particular upstair radiator every two to three weeks. Has anyone got any ideas please.

It is a cable operateted Jollyfill bottom inlet valve.I have noticed the fault occurs only when both buttons are accidently pushed together. To rectify this you have to wiggle both buttons gently to make them reseat otherwise the internal over flow will keep running Any ideas thanks again

Thanks for that but the cystern is only 2 months old.

I have a LECICO close coupled dual flush cystern which on occasions overflows because the buttons do not seem to seat properly. I have tried spraying them with siicon spray but the trouble still exists .I wonder if the fault is inside the cystern any ideas please.

Many thanks for your idea.Ishall definately look into that. Must admit I was very impressed with your handiwork.

DIY Fitted Bedroom Over the past few years I have fitted several bedrooms for myself and family as supplied by Wickes. Imagine my dismay when I went to order another to be told they no longer sell them I don’t want freestanding wardrobes and found Wickes system very versatile to accommodate...

Bosch Excel SGS 45E02GB/45 approx 4 yrs old not working When switched on control panel did not light up. Checked fuse, filter, and usual things without success Removed front panel, had 240V at on/off switch only had 12.5V at door switch. Last tests done with water disconnected. Any advice...