Search results

thanks for that!!!

tell me about it!!!!! something tells me that the surprise he will get from the bill will make the ink from his biro dry out!

the tenants say that the downstairs has never been warm, before I put in the sm-4 I did manage to get the 2 large downstairs rads hot but they soon faded. The landlord of course says that when he lived there it worked....but the again he would!!

Yes I ahve taken all the sludge out of the expansion tank, as it was pretty grim and I changed the pump from a 15-50 to a 15-60

Hi I would welcome anymore suggestions as I am about to blow my top. Got a s plan hybrid system it looks as though the only 22 mm is from the flow and return. there are 3 15mm drops each feeding at least 3 rads tothe ground floor. The problem is that the rads to the ground floor are not...

is it electric???

Has anybody got a copy of the crosslee royal cozyfire super 16 they could forward to me. I rang crosslee for this and they just sent me a copy of an exploded diagram!!!!! Thanks again!!

I have come across them not working!!!!! BE AFRAID BE VERY AFRAID!!!

Has anyone got a service manual they could forwrd on to me for the potterton netaheat profile? Cheers

ok it did'nt LOOK like it!!!

definitely not a good idea because of back siphonage, which could cause you to contaminate your cold water supply. A torbeck is the solution in toilet cisterns, but i have never seen them in lofts. I have seen ball valves where the water outlet to the cistern sprinkles the water and not pours.

I have been asked to add some radiators to a mobile home, however the pipework did not like it was done in copper (it had been sprayed silver, but the joints were just too perfect to be copper, if you know what I mean) Can anyone advise on this??

First of all find out from which cistern in the loft the overflow is dripping from. Not enough information about your c/h system, can you have your hot water and central heating on separately? has this only just started to happen? Have you noticed if the colour of the water from your hot tap...

when swapping boilers, under part L is it a regulation to change single panel rads to single panel convectors or just a recommendation??

look at the room stat on the wall, check that it is at 20. if switched to low setting this can happen what you are describing.Also I know this is a daft suggestion but do check your programmer. I also agree about the reset button but without anymore info its hard to tell. is the pilot lit? If...

did you turn down your room stat on the wall???

Have you got TRVs on the rads which are not working? if so this could be the problem.

Thanks for that I'll have a look later on!!

Has anybody got or can point me in the right direction for the manufacturers instructions for a Flavel the regent radiant gas fire, for servicing purposes as the installer did not leave these with the owner and I would like to have a quick look before I go to the job. Just had a quick look on...

Probably the synchron motor of the 3 port valve if not then the valve itself. Get someone out to do the job .