Search results

Thank you Sparkymarka for all your help Best wishes and happy new year

Cut some some small pieces of plasterboard up that will fit in and behind the holes top and bottom for example, there will be gaps but dont worry about that for now, your aim is to close in the hole as much as you can. The board goes in and behind the hole so make it wider than the diameter you...

We moved into our new home just before Christmas, the old lady we bought the house from apologised as she could not remember the code for the Paragon E alarm system. I will upgrade the panel later in the year but would like to have some level of security and need to have access to reset it...

Thanks folks, I really appreciate the advice, going to finish the install tomorrow, everything prepped, backplate mounted, mains off! Will triple check above again before final install. :)

Hi, thank you for the quick replies, i will try the connection method as per EFLImpudence and 333rocky333 the actual face of the unit (not shown in pic) does relate to the sticker (so not upside down) but agreed probably are much better units to be had. Thanks again

Hi, thanks for the reply, so would you put the earths into a block connector? Just to clarify then, would both neurals mains and Immersion go into - U1 mains supply into - Com Live Immersion live into - live out and what would NC connect too (if anything)? Thanks

Hi, could I ask if someone has come across the wiring diagram below, need to upgrade the immersion timer as old one was unsafe. I just want to make sure the appliance (immersion) goes on the right side of the timer. If anyone could highlight the correct sequence i would be very greatful...

Many thanks for all who replied, really appreciate all your help. Great forum

Thanks John, I thought that probably would be the case re the switched live using the neutral cable. Hi gavgas, thanks for the quick reply. Just so I have this right the live and the 'down arrow' symbol would be more or less the old setup like for like with the exception that the new stat...

Hi, hoping I can get some advice on a room stat replacement. I have a Siemens TLX 2356 which no longer functions, I wanted to replace it with a digital one so I bought a 'UPONOR' DS1-EL I realise I may have to add another multi core cable but needed some help with the final connection...

Just finished searching on google, 'Approved Inspector' appears to be the actual job title, should have checked before last post, will now try and find one closest to me. Fingers crossed.

Thank you for the time you've taken to give such a comprehensive reply, that really has helped, we will be making several calls today to get this sorted out asap. Am I right in saying the private route would be a call to a Architectural Technician or a structural engineer or involve both ...

A friend has mentioned that there are independent surveyors that can issue Regularisation certificates once work is completed, is this true and would this be wiser than the city council route?

Yes selling, buyers solicitor refused indemnity despite every effort on our part, now biting the bullet and trying to get our money's worth on sale of house, it was converted in 2000, we will need fire doors on every level, mains smoke alarm interlinked on every floor in hallway among a few...

Depth of rafter = 120mm, thickness of approx 36mm Centers of rafters are 470mm

Will go measure and come back to you, should only take a few minutes

Hi, new to forum, hoping I can get some advice, I converted our loft in 2000, at that time I used 50mm foiled backed king-span insulation with 50mm air gap. I have now sought Regularisation as hindsight is a wonderful thing, i expected the fire doors that I need to fit but was surprised to hear...