Search results

only a diy'er but maybe couple of coats of zinseer bin or even oil based undercoat, then over paint with your masonary paint. However i am sure the pros will be on later and give you sound advice.

Hi,lads'n' lassies,as the title are there any potential downfalls using Dulux exterior trade u/c and gloss inside? I have a tin of each just sat in the garage,but could perhaps use them inside. Thanks...

Zampa =LEGEND :lol: :lol: :lol: you should post more frequently though!! :twisted:

you are better off posting this in the plumbing and central heating forum,or maybe a mod could move it for you.

Cost £25 each post + carridge end post etc are more expensive.Picked mine up = no carridge due to being only 15 miles away.Hope this helps.

Hi , To the Mods i am no way affiliated to this company and have not added any links,this is just for information for D.I.Y. ers. Ok my concrete posts where absolutly perished,search usually channels re price...

Hi fox thanks for reply,but sorry to late,was the cry! Already coated x2 with dark oak fence paint and then x2 sadolin light stain varnish(exterior) will have to see what happens,not ideal i know,but better than nought! 8)

Thanks for that Ana72 is it like karma Chamelion 8)

joe,thanks should have said.I have 3 tins(2.5) litres of Dulux trade int&ext solvent based varnish.2 are dark ebony i think and a clear one,picked up cheap£10 for all 3 :lol: :lol: i intended mixing all 3 together couple coats on furniture and couple on my new shed (when i get it!!) Do you...

Hi, my garden furniture is a couple of years old now,but still solid,however 'er indoors insisted a couple of years ago that i paint them in "garden shades" paint,which is orangy in colour.This has now weathered a lot peeling slightly and looks unsightly.I have a lot of Dark oak fence paint,do...

I'm no expert,but it maybe syphoning back through the outlet pipe,try lifting it up 6 inches if possible see if this helps.I am sure the experts will be along later to give you the correct advice.Hope this helps.

Buy a wood burner-simples :lol:

Presume its emulsion? How about boiling water on a sponge repeatedly until softened then "pick" it off. Proffesionnals will answer later as i am onlyD.I.Y er good luck :lol:

Use a Nitromores type product as a heat gun wont work.All it will do is heat the water up inside and you cannot get the paint off.Much easier with liquid stipper just make sure you give it a good clean afterwards to remove any residue.

Hi again, Sorry to bring old thread up,but might be relevant.Since Nov worked ok,last week same old fault E3,after reading other threads tried to reset,worked to some extent.When i elect normal wash say it runs 90% then comes up with E9,i know you have said its connected to E1&E2...

Thanks lads give me a bit more confidence now. :D

cowley thanks again,if it is what you/twgas say it is can I/gas repairman remody it. :?

Thanks for replys lads,will check model no tomoz and report back.cowley the button i press maybe what you say,but why does it only occur in freezing temps? works fine at all other times i.e. not poor circ, lack of water,stat.Not disputing what you say,you guys are the experts,just somehow dunt...

Hi,as above we have a Potterton "normal" boiler i.e. not a combi! you will gather im not technical,we have lived here 15 years same boiler age unknown.No problems till last winters cold spell,when it dipped below freezing boiler would not ignite itself.When weather is ok boiler is ok ,now this...

LJW61,thanks have given it first coat,will ensure second coat is mixed very well. :lol: