Search results

You first will have to work out the quantities of materials required for the job. Build the timber trusses onto the slab and maybe insulate using celutex RR insulation slab, just cut into sizes that will fit tightly between the timbers. The timber size will depend on the span but if the...

Hi Paul, I would personally go the pitched roof way, this would then cloak the problem you have and the house would look nicer for it. FInd a small jobbing builder to quote you, it will be more expensive than trying other methods but at least you will only have to do it properly once. it could...

OK Cynthia, maybe while you are there they may do a course on house maintenence, you will then be able to do your loft then as well.... :)

If the walls are sound, just a coat of size should be sufficient..

Surely you have someone who could help, maybe there is a local training establishment that do courses on vehicle maintenence, if you are that way inclined and would like to look after your car yourself then this would be a good option. The courses are not that expensive and are for an hour or so...

Hi again Cynthia, ask a friend to give you some tips on simple maintenence, it could save you a lot of money. Garages are very expensive these days....

Power steering pump or belt is probably the cause, if it is the belt it may be just a case of tightening it or replacing the belt, if it is the pump then that will be more expensive, look at the belt first...other than that it could be a valve on the steering rack its self. Can you explain what...

Using the same size wire that was used to go to the thermostat should be sufficient, the coloured is imaterial as long as it is left short and looks like a link.

A lot of good embossed papers come with a backing paper already fitted to avoid any stretching of the paper when pasting and hanging, if your paper does not have this feature then a problem lies when you apply the paste, you really need to apply the same amount of paste to each hang, leave to...

You can use foot long bolts but you will have trouble opening the doors, if they could open at all.... :lol:

I would cut the ends straight then using a decent router machine a good edge on each, be carefull that you cut into the rolled face of the worktop in the right manor for each or else the cutter will break out the laminate. Once that has been done using a biscuit cutter cut out the slots to fit...

By the time you finish asking questions on this one you could have drilled all the holes in the wood and then drilled through the concrete, if you cut all the wooden battens to suit their positions then drill them all together, site each batten then drill the concrete you only have to change the...

It sounds as if the inner walls are concrete, best way to go is SDS, there still may be a problem with concrete if it is reinforced, the drill will then skip off the re-bar. If this is the case you will need to either move the hole position away from the re-bar or you will be able to drill the...

Hi Iso and Tamschick, I have made contact with the owners club at last, between us we have a list of 45 McCoy's, what is the registrations of yours, it will be nice to get so info for each of them. If you contact me at [email protected] I will pass on info of the others if you are...

Hi Micky, Post me your celica forum user name and I will have a word with him.

Hi Micky, my sons username on the celia forum is CTM.

On some performance cars the engine can continue to run on tick over to protect the turbos after switching off then automatically shut off after the required period of time, maybe our friend requires this for his turbo protection.

Hey meganq, didn't understand your comment, would you please elaborate......

Hi Micky, My son owns a Celica GT 4, he is always coming round with little faults on it, rattle here and ticking noise there. He has yet to understand that older cars get like us and have growing pains. once that is undersood then I think that is the time when people really get compassionate...

Thanks TamsChick, if you want to contact me you can do so at concha_self at yahoo dot com....Al