Search results

I'm looking for a product to seal and if possible harden mortar. Anyone of of anything?

Thanks. My sparkie who will be wiring it up on a new radial told me it would need an FCU. He seemed to think there was a controller that had an inbuilt one, but coulnd't remember the name and I can't find it on Google. He said the FCU would need to be in easy and obvious reach. Anyone come...

Can you buy a combined FCU and controller in the same 1 or 2g unit?

I'm considering having it done. I'd have a new radial installed for it. Does it require a separate FCU for the controller or can you buy combined ones (I can't find any).

Anyone?

Thanks mate

I've going to build two separate waste runs that meet and go into one 50mm pipe before hitting the SVP. I'm going to run: 1. Shower waste (40mm) into 50mm then later connect a 32mm sink waste into this then to join 2. below in 50mm pipe 2. Sink waste (32mm) then this will go into a 50mm...

What is this about clearing it with a cable tie? Is it required each time you use it?

Been around for a while, heard of them, but never tried one. Thins like the BC 38mm air test scare me with these fitted, also do they still self close in years to come if residues ends up down the pipe? The fact you don't need to use an AAV with these interests me though! Anyone had...

Just built steps outside the house, covered in limestone and bedded in mortar. Look great. The mortar's tough but I've used a bit too much plasticiser and would like to both seal it and also harden it with something. Product ideas please?

Hi, Apologies. I meant the sort of connector shown in the diagram. I wasn't sure if this was allowable under Part H. Cheers!

I'm taking a branch off just above an SVP manifold so there is a soil pipe now running in the horizontal plane. I'm wondering if it is permissible to then use a double branch connector (or similar) to allow me to feed in two toilets into this pipe (see attached image)? If not, how do you...

REMOVED

Thanks mate - much appreciated!

What is standard practise? I'd think either a mortar or concrete bed. However, will the Yorkshire stone stick to the side with these or do I need something else as I can't see either getting much suction on the stone?

[/url] Anyone know?

Hi guys, Sorry for late reply. I'm going to use a BAL adhesive - undecided which one yet, but with teh board costing about £80 alone I certainly wont scrimp on addy

Does it need anything else (taking or primer) or can I tile straight onto Aquapanel in the shower area?

Thanks Chris - 50mm seal into 40mm waste noted. I'll make sure there's the 1 in 80 fall, but what I was tryingt o ask is can teh 40mm waste go into the side of the 110mm soil pipe (that is lying at 1 in 80 fall)? It will look like this (but horizontally instead of vertically)...