Search results

Hi Hoping for some help, please excuse my ignorance in these matters. We have a Washing Machine plumbed in, the waste water goes directly down a waste pipe which looks like this http://www.screwfix.com/p/waste-pipe-32mm-pack-of-10/19046 but with threads at the bottom (but not at the top)...

Hi We have a drainage problem at my house, basically the front drive which is gravelled floods to a depth which is of some concern (4-5 inches of water). One of the reasons is becuase the guttering downpipe justs goes straight onto the drive - there is no drain. However the other side of...

Hi We have a drainage problem at my house, basically the front drive which is gravelled floods to a depth which is of some concern (4-5 inches of water). One of the reasons is becuase the guttering downpipe justs goes straight onto the drive - there is no drain. However the other side of...

I meant laying the blackout poythene under the 1ft of soil....i am going to dig the area over, remove all the weeds etc - well best i can, lay a blackout polythene layer and then dump 1 - 1.5 foot of compost/soil combo. Does that sound like a plan ?

Thanks guys, Some good info there...basically : 1) Dig over what i can, removing stones, weeds etc. 2) Apply sharp sand / leaf mould (?) 3) Box off and fill about 18inch of soil and compost mix. 4) Aiming to plant some pototoes. Do you think it worth laying one of them black out...

[/url] Hi, can you tell me where you got the shed from ?...Looks good !

Hi Looking to build a vegetable patch in the garden, we have a section of the garden which is basically wasteland - its full of weeds, hardcore, glass etc... I thought it would be a good idea to create something out of it - veggies :-) I've attached a picture of the area basically I...

Hi Got a false drawer in the kitchen, its opposite the sink. The knob is very very loose, the only access to the screw that the knob screws into is from behind the false drawer - however its so close the sink, I cannot get any tools in there to allow me to tighten it. Any ideas ...

Yes, its aluminium guttering, a single peice that wraps the house. Can i adjust the slope ?

Hi I have just cleaned the gutters around my house this morning, getting rid of all the leaves and sludge etc. I noticed that one section of the guttering had a lot of standing water in it - even AFTER I had cleaned it. It looked to be draining the water ever so slightly away from the...

Hi Sussed it !! I was turning the legs the wrong way :oops: Thanks for all assistance

Hi Thanks, yes you are correct it only raised the back leg. I cannot figure out how to raise the front legs ...I can see the front legs, i've attached two pictures. Is there a special tool to raise the front legs ? It looks like there is a very small hole above the actual leg ...

Hi It looks like that screw at the front of the Dishwasher is only raising the back of the Dishwasher - I guess it should it raise both front and back ?.. Thanks

Hi Just got round to looking at this......That's what Easter breaks are all about :-) I have taken the kickboard off, and can see the Dishwasher is sitting on a slab of wood (which is fixed to the floor). The Dishwasher has a screw that lowers and heightens it. I have adjusted the...

Hi thanks for the reply, sounds about right we have loads of "niggles" in this house. What is the recommended way to raise the dishwasher ?

\____________________/ sort of that shape removed from the kickplate