Search results

tap needs stripping to be examined.

Had a bust up with water authority last week over very same problem, they refused to clear up the mess for the customer :evil: :twisted: :x . lets just say after a few phone calls in the right ears, they agreed to clear up the mess. :lol:

Just a wild idea, if you set the zone valve to manual does it still do it?

Makes no difference that you have teed off the main, it should still work. If you have fitted an isolation valve to the shower turn it to the off position, if you have not, turn off the mains water and take the pipe out of the shower connection and isolate the power (a must) Get someone...

:shock: :lol:

As you are aware this shower has a 'Low Pressure' indicator which operates when the water pressure is insufficient. You have almost a 15 metre run which shouldn't be too much of a problem on mains pressure as long as the rest of the property has a very good mains water flow too. If you...

There are two kinds of defragmentation. There is logical fragmentation, which is how the file system “sees” the disk, and there is physical fragmentation, which is how the file actually resides on the disk itself, try the below: Double-click My Computer Right-click a hard drive (C drive...

Been out to a customer today as an emergency. Knocked on the door to be greeted by a screaming woman who pushed me upstairs as quickly as possible, i walked into the bedroom to see her husband sat on the floor with his thumb over the top of a pipe and a lovely cream carpet covered in black...

OK. In the bottom right hand side of your computer you have all your start up icons (it may have an arrow blocking some of them), right click on as many as possible and close them down (make sure you are not on the internet). Once you have closed down as many as possible (hopefully all of...

Sorry mis-read, thought it was Outlook. :oops: .. You cannot do this with Express.

cant get my head around your comments, but if it's a plastic connection use some "ptfe tape" around the thread and then re-seal. If however it's the metal nut on the underside which screws up onto the sink, slightly unscrew the nus and apply some clear silicone and re-tighten.

leg it :lol:

I always fit heatline ... find them very good for the money.

Strange problem this, wonder if the tap is at fault? .... just a maybe :?

What operating system are you using?

If you can get hold of another copy of Outlook and re-install it if it came as part of your computer when you bought it. If however you loaded in yourself, re-install from that disc again, if loaded as part of Microsoft office there is an option on the cd to repair any errors.

To recover your pc: All you need to do is put the first recovery disc into your computer. Restart the computer with the disc in and allow the pc to boot up from the CD, then follow the on-screen instructions. Very simple to do.

Yuk - Nasty plastic Don't do it. Went out to one of these so called excellent plastic installations last week, what a shambles it looked for starters, one of the fittings on the mains cold feed had blown off, nice mess and a nice £100 bill for the customer at 11pm at night. DON'T DO IT !!

Yep you shouldn't do it :lol:

I am trying to get into corgi at the moment but being self employed as a plumber (No gas or boiler work) they wont let me. Is this the only method of getting into gas now? :shock: , when i qualified in 1993 you only had to apply to be on the gas course, i never bothered wish i had now.