Search results

No need to drain, just turn the valves off at each end of the radiator, unscrew the nuts which connect to the radiator (have something at hand to catch the water) and take radiator off the wall. Job done.

Trial and error really, i would start by having the programmer replaced.

You cuold get away with this but if your bath is on the run after the sink and you were to empty them both together, your sink would drain very slowly. Also your sink is 32mm and your bath is 40mm on the waste so you will need to modify your waste pipe to suite.

I can't tell you how to get your old restore points back because they may be corrupt, but I can tell you how to fix this problem so you can get them in the future. Right click My Computer, choose "Properties" then click on "System Restore" tab. Put a check in the box for "Disable Restore...

is it a quarter turn tap? has it ever worked? It's most probably a foreigner which wont give out the correct flow.

What make of shower is it? is the cold water to the shower mains?

This may sound really silly but does your neighbour get up around this time to go to work? The reason i ask is .... when i lived at home my mum & dad had an en-suite and their bed was on the other side of the wall to the en-suite where the toilet was fixed. Our neighbour was a milkman and he...

E-Machines in general are a nightmare to repair, you want to try matching up the memory modules, impossible. My opinion is that if you have a lot of patience and money, delve in and fault find, but basic parts that are compitible fail to function ..... i no longer touch these machines as you...

If possible look on the pipe runs up to the shower thats making the noise for isolating valves, try regulating them. If this isn't the case a little more information on the noise would be helpful: Is it a whistling noise? Water gushing noise? Banging noise?

I fit them on return too, makes no difference these days, most decent valves (Cheapies aside) work on either.

Went out to one last week. Old house new side extension, 3 extension rads where getting hot with the hot water, seems the builder tee'd into the flow and return after the last tee. Lets just say he had some explaining to do to the customer. :lol:

Did the programmer ever work?

Split coil in your cylinder, get a plumber in ASAP.

Pour loads of neat thick bleach down the plug hole before you go to bed and leave it. In the morning pour about 3 kettles of boiling hot water down, should do the trick.

Ok, first of all you CAN be isolated, they are doing it to protect you and your family. Secondly if the company who failed the installation fitted the boiler, then i suggest you get onto their management team first thing in the morning and sort it out, if you have a maintenance contract...

Agree with this one, make a hole as suggested large enough to place a timber behind the studding then screw away.

Good that.

Unless i am mistaken on what you are saying you are wrong, you do need a trap on the waste pipe.

I bet you have pulled loads of women with your charm and witt over the years!!

I charge £250 for a standard bathroom fit and i would charge £50 for sink.