Search results

Does any one know of this company. Been to see a whirlpool bath with a thermostatic cartridge issue but can't find anything about them on the web. Any help about possible part suppliers would be appreciated. Mark

Guys, I wonder if any of you could offer me some advice? My module has failed in my Hotpoint WML760 so I've sourced a reconditioned on. With the board came a note suggesting I check the motor for earth leakage. I've managed to borrow a Metrel Easitest from my wife's work but need advice...

Hi guys, I wonder if any of you could give me a little advice, I've installed an IP66 rated socket in an outhouse adjoining my house. This is fed from a Safetysure RCD spur, wired as a spur from a double socket next to it. When I turned my electric back on at the consumer unit the external...

Hello all, Sorry in advance for the long post, but I hope a lot of detail will help you help me! I'd appreciate some assistance from you experienced guys with a persistent problem relating to a heating system I've been working on for a customer. I recently fitted a indirect cylinder for a...

Guys, I wonder if you could offer me a bit of advice, been helping my friend with his heating system lately and got a call this evening to say that his combi has suddenly broke down, I went to have a quick look thinking it would be something and nothing but am at a bit of a loss as to the...

Guys, Have a Kamco CF90 which is great however I've noticed that there are a couple of attachements that might be worth adding! I'm looking at the Combimag and also the Radhammer, I did have a similar attachement for my SDS but this went walkabouts earlier this year. What I'd like to...

Guys, A bit of a random one here, I've come across this problem a few times in my career but never known how to deal with it. I've got to unblock some waste pipepwork (1 1/2") tomorrow that is attached to urinals. The urinals were overflowing and as a result I changed the traps and cleared...

Guys, Hoping one of you professionals will be able to offer me some advice. I went to a job today in a pub with old 1 1/2" iron pipework, it was tied into a relatively modern central heating system, however the pipe has developed a leak and is streaming water into the cellar. After...

Guys, Can any of you advise me as to what ration this filler should be mixed with sanding dust? Also is it mixed in terms of volume or weight? Any help would be appreciated, Mark

Guys, I've recently noticed that my Vokera Excell has had delay in firing when turning on a hot water tap (about 15 seconds), after reading similar posts on here I reckon that the divertor valve needs refurbishing. In past posts you mention a service kit for the valve, do any of you have the...

Guys, Not sure if you'll be able to help but can you tell me if any spares are still available for my Servowarm boiler. I'm specifically looking for a control thermostat, part number 7718, GC Number 379307. I can't seem to find anyone who can source this item so your help would be...

Guys, I have an Ideal Isar 30100 boiler which has developed an L F error. Unfortunately I do not have the manual for my boiler (is one available on line) but did go onto the Ideal site and sourced the manual for the later Isar HE. Obviously I am aware that these two boilers are different...

Guys, Hopefully a nice easy question. I've (very) limited experience of working with iron pipework and am experiencing a problem when it comes to joining two old cast iron radiators. I thought that liquid PTFE would do the job but even after leaving it over night this failed dismally...

Guys, I have recently removed my gas fire, had my chimney checked and then installed an open fire. Having thought that the fireback of the arched insert I chose would have done everything required I have found that although the fire burns well all the heat passes straight up the chimney...

Hi all, I wonder if you could possibly help me with my boiler. It has lately started to make a 'pulsing' sound when the boiler is fired up. As I look through into the combustion chamber I can see that the flames are syncronizied with the pusling sound, I have checked the fan and the pump...

Guys, I recently opened up my fireplace removing a gas fire and replacing it with a fire basket. In the process I got my local chimney sweep out who advised me that my fireplace was far to 'open' and that smoke would fill the room instead of going up the chimney. The opening to the...

Guys, I wonder if you'd be able to offer me some advice. My Zanussi ZWF1427W has suddenly died on me, upon opening it up I have removed the timer (or is it a slave unit) and assembly user interface for further inspection. The machine does nothing, the door doesn't lock, LED display doesn't...

Guys, A bit of a strange one but would any of you be able to tell me whether or not you know of any company who offer training in commercial appliances? I have training and experience in domestic appliances but would like to look into glass washers and commercial dishwashers. Any help...

Guys, I own a 2000 Vauxhall Combo. Recently I found that it was overheating. On closer inspection I noticed the fan wasn't working. Three wires connect from the loom into the fan, these are (from left to right: red/blue black brown white I have disconnected the terminal pins and...

Guys, Wonder if you might be able to offer me some advice as to which products will suit my needs. I would like to have music piped through my house, for example when I am in the bathroom have music played from a central amplifier to that specific room. I have no problems in wiring up such...